Join 60,000+ competitive exam aspirants
Turbo alternators run at
A variable speed around 2000 rpm
A constant speed at 1000 rpm
A variable speed of 3000 rpm
A variable speed above 1000 rpm
A variable speed of 3000 rpm
Turbo-alternators are high-speed AC generators driven by steam turbines. They are designed to operate at high synchronous speeds, typically 3000 rpm for 50 Hz systems, to match the efficient operating speed of steam turbines.
Turbo-alternators are high-speed AC generators driven by steam turbines. They are designed to operate at high synchronous speeds, typically 3000 rpm for 50 Hz systems, to match the efficient operating speed of steam turbines.
NsтАЛ=P120fтАЛ тАФ Synchronous speed formula where f is frequency in Hz and P is the number of poles.
The rotational speed (Ns) is determined by the synchronous speed formula NsтАЛ=P120fтАЛ, where f is the system frequency and P is the number of poles. Since steam turbines are most efficient at high speeds, turbo-alternators are constructed with a small number of poles (typically P=2), which yields a synchronous speed of 3000 rpm for a standard 50 Hz supply.
Turbo-alternators utilize cylindrical rotor construction due to high centrifugal forces.
The rotor diameter is small while the axial length is large to maintain mechanical integrity at 3000 rpm.
Driven by thermal, nuclear, or geothermal steam turbines.
High speed results in better cooling and reduced material requirements for the same power output.
Higher power-to-weight ratio
Compact size due to high speed
High centrifugal stress on rotor windings
Requires complex lubrication and cooling systems
Thermal power plants
Nuclear power stations
In India (50 Hz grid), the standard speed for a 2-pole turbo-alternator is 3000 rpm.
Salient pole alternators (hydro-generators) run at much lower speeds due to a large number of poles.
C is correct тАФ Turbo-alternators are designed as 2-pole machines to operate at a constant synchronous speed of 3000 rpm for 50 Hz grid frequency.
Always verify if the question refers to a 'Turbo-alternator' (2-pole, high speed) or a 'Hydro-alternator' (many poles, low speed) to avoid confusion in speed calculation questions.