Join 60,000+ competitive exam aspirants
The┬а bedding on a cable consists of
Jute strands
Hessian tape
Paper tape compounded with fibrous material
Any of above
Any of above
The bedding of an underground cable is a protective layer applied over the metallic sheath to prevent corrosion and mechanical injury. It typically consists of fibrous materials such as jute, hessian tape, or paper tape compounded with a preservative, making all the listed options valid constituents.
The bedding of an underground cable is a protective layer applied over the metallic sheath to prevent corrosion and mechanical injury. It typically consists of fibrous materials such as jute, hessian tape, or paper tape compounded with a preservative, making all the listed options valid constituents.
RaтАЛ=╧БAlтАЛ тАФ where RaтАЛ is the resistance of the cable material, ╧Б is resistivity, l is length, and A is the cross-sectional area.
The primary function of the bedding is to cushion the lead sheath against mechanical damage caused by the armor (steel wires or tapes) applied over it. By acting as a separator, it prevents direct contact between the metallic armor and the sheath, while the chemical compounds (like bitumen) protect the sheath from moisture and corrosive soil environments.
Bedding is located between the metallic sheath and the armor.
It protects the metallic sheath from electrochemical corrosion.
Jute is widely used due to its fibrous, cushioning nature.
Bitumen compound is often applied to these fibrous materials to make them water-resistant.
Provides a cushion against mechanical pressure from armor
Prevents electrolytic or chemical corrosion of the lead sheath
Adds thickness and volume to the overall cable structure
Susceptible to rot if the outer protective layers are damaged
Underground transmission and distribution cables
Submarine power cable construction
The sequence of layers in an underground cable starting from the conductor is: Conductor тЖТ Insulation тЖТ Metallic Sheath тЖТ Bedding тЖТ Armor тЖТ Serving.
The use of jute is historical; modern cables may utilize synthetic tapes, but the term 'bedding' is generic for this protective layer.
D is correct тАФ Jute, Hessian tape, and fibrous compounded paper tape are all standard materials used to form the bedding layer of an underground cable.
In competitive exams, remember that 'Bedding' is always between the metallic sheath and the armor, while 'Serving' is the final layer over the armor to protect it from the environment.