Join 60,000+ competitive exam aspirants
The material commonly used for sheaths of underground cables is
Copper
Lead
Steel
Rubber
Lead
Lead is the material commonly used for the metallic sheath in underground cables to provide an impermeable barrier against moisture and environmental contaminants. Since underground cables are buried in soil or laid in ducts, the sheath acts as a protective shield to maintain the integrity of the cable insulation.
Lead is the material commonly used for the metallic sheath in underground cables to provide an impermeable barrier against moisture and environmental contaminants. Since underground cables are buried in soil or laid in ducts, the sheath acts as a protective shield to maintain the integrity of the cable insulation.
RinsтАЛ=2╧АL╧БтАЛln(rRтАЛ) тАФ Insulation resistance formula where moisture ingress would cause a significant decrease in ╧Б (resistivity).
The cable sheath serves two primary functions: moisture resistance and mechanical protection. Lead is chemically stable, non-corrosive in moist environments, and highly malleable, allowing it to be extruded seamlessly over the insulated core. This creates an airtight and watertight layer that prevents moisture ingress, which would otherwise degrade the dielectric strength of the insulation (such as paper or XLPE).
The lead sheath is non-hygroscopic and chemically inert.
It acts as a return path for fault currents in some specific cable designs.
Lead sheathing is essential for paper-insulated lead-covered (PILC) cables.
Aluminum is sometimes used as a cheaper alternative for sheathing, but lead is preferred for superior flexibility and corrosion resistance.
Excellent moisture resistance
Highly flexible and malleable for installation
Effective barrier against chemical attack in soil
High cost compared to modern synthetic materials
Heavy weight increases cable transport difficulty
Susceptible to mechanical fatigue under vibration
High-voltage underground transmission lines
Submarine power cable systems
Areas with high moisture or chemical soil contaminants
The sheath must be grounded at one or both ends depending on the system configuration to control induced voltages.
Wrong options: Copper is used for the conductor (not sheath), Steel is used for armor (mechanical protection), and Rubber is an insulating material.
B is correct тАФ Lead is used as an impermeable metallic sheath to prevent moisture ingress into the cable insulation.
In cables, remember the mnemonic 'Conductor тЖТ Insulation тЖТ Sheath тЖТ Bedding тЖТ Armour тЖТ Serving' to identify the exact position and purpose of the lead sheath.