Join 60,000+ competitive exam aspirants
The conductors of the overhead lines are
Stranded conductors
Solid conductors
Both solid and stranded
None of the above
Stranded conductors
Overhead transmission lines typically use stranded conductors to ensure mechanical flexibility and prevent fatigue failure caused by wind-induced vibrations. Unlike solid conductors, which are stiff and prone to cracking under cyclic loading, stranded conductors consist of multiple small-diameter wires wound together, providing high strength-to-weight ratio and resilience.
Overhead transmission lines typically use stranded conductors to ensure mechanical flexibility and prevent fatigue failure caused by wind-induced vibrations. Unlike solid conductors, which are stiff and prone to cracking under cyclic loading, stranded conductors consist of multiple small-diameter wires wound together, providing high strength-to-weight ratio and resilience.
RACтАЛ>RDCтАЛ тАФ Effective resistance increases due to skin effect in larger conductors
P=3тАЛVLтАЛILтАЛcos╧Х тАФ Transmission line power capacity relation
The stranded structure allows the conductor to bend without plastic deformation. During installation and operation, overhead lines are subject to mechanical stress and tension; a stranded design distributes these stresses across multiple strands, effectively increasing the endurance limit of the line against environmental factors like wind sway and ice loading.
Stranded conductors provide necessary mechanical flexibility for long spans.
They minimize the risk of mechanical fatigue breakage.
Skin effect is slightly more pronounced in solid conductors of larger diameters.
Common materials include ACSR (Aluminum Conductor Steel Reinforced).
High mechanical strength and flexibility.
Resistance to vibration-induced fatigue.
Ease of handling and stringing during construction.
Slightly larger overall diameter compared to a solid conductor of equivalent area.
Increased risk of internal corrosion if not properly greased.
High voltage overhead transmission lines.
Distribution systems (LT and HT lines).
Substation busbars.
Solid conductors are only used for very short spans or low-voltage distribution where flexibility is not a primary concern.
ACSR is the most common type of stranded conductor used in India, where a central steel core provides high tensile strength and surrounding aluminum strands provide high conductivity.
A is correct тАФ Stranded conductors are used in overhead transmission lines to provide mechanical flexibility and resistance to fatigue caused by wind vibrations.
Always remember that in power systems, mechanical reliability is as critical as electrical conductivity, which is why stranded conductors are standard practice.