Join 60,000+ competitive exam aspirants
The usual spans with R.C.C. poles are
40тАФ50 metres
60тАФ100 metres
200 тАУ 300 meters
80 тАУ 150 meters
60тАФ100 metres
Reinforced Cement Concrete (RCC) poles are commonly used for low-voltage (LT) and medium-voltage (up to 11kV) distribution lines. Because of their limited mechanical strength compared to steel tubular or lattice steel towers, they are designed for shorter spans typically ranging from 60 to 100 metres.
Reinforced Cement Concrete (RCC) poles are commonly used for low-voltage (LT) and medium-voltage (up to 11kV) distribution lines. Because of their limited mechanical strength compared to steel tubular or lattice steel towers, they are designed for shorter spans typically ranging from 60 to 100 metres.
Sag(d)=8TwL2тАЛ тАФ where w is weight per unit length, L is span, and T is tension
TmaxтАЛ=8dallowтАЛwL2тАЛ тАФ relates span to allowable tension and sag
The span length of a transmission or distribution line is governed by the mechanical strength of the supporting structure, the sag of the conductor, and the allowable ground clearance. RCC poles have high durability and require low maintenance but possess limited bending moment capacity. If the span exceeds 100 metres, the increased weight of the conductor and higher wind load would create excessive stress on the pole base, potentially causing structural failure or excessive sag.
RCC poles are primarily used for urban and rural distribution networks.
The standard design span for RCC poles is between 60m and 100m.
Wooden poles typically have shorter spans (40-60m) while steel towers can exceed 200-300m.
RCC poles are susceptible to cracks if subjected to excessive tension.
Longer service life compared to wooden poles
Negligible maintenance requirements
Good resistance to weathering and termite attack
Heavy weight making transportation and erection difficult
Brittle in nature compared to steel poles
High risk of cracking during handling
Rural electrification schemes
Low-tension (LT) distribution lines
11kV sub-transmission lines
Steel tubular poles have spans of 50-80m.
Lattice steel towers are used for 132kV, 220kV, and 400kV lines with spans of 200-400m.
Option A (40-50m) is typically associated with light wooden poles or very short spans in congested areas.
B is correct тАФ RCC poles are economically and mechanically optimized for standard distribution spans of 60 to 100 metres.
Always remember that span length is directly proportional to the mechanical strength of the support; higher voltage levels require stronger supports (towers) which permit longer spans, whereas distribution poles are optimized for lower costs and shorter spans.