Join 60,000+ competitive exam aspirants
The connected load of domestic consumer is usually about
to 5 kW
10 to 20 kW
20 to 30 kW
Below 1 kW
to 5 kW
The connected load of a typical domestic consumer refers to the sum of the power ratings of all electrical appliances (e.g., lights, fans, refrigerator, washing machine) installed in the residence. For standard Indian domestic connections, this value is typically in the range of 1 kW to 5 kW.
The connected load of a typical domestic consumer refers to the sum of the power ratings of all electrical appliances (e.g., lights, fans, refrigerator, washing machine) installed in the residence. For standard Indian domestic connections, this value is typically in the range of 1 kW to 5 kW.
Connected┬аLoad=тИСPiтАЛ тАФ Summation of all installed device ratings
Demand┬аFactor=ConnectedLoadMaximumDemandтАЛ тАФ Ratio identifying load utilization
The total connected load is defined as the summation of the wattage ratings of all electrical devices connected to the distribution board. Because not all appliances are used simultaneously, the actual peak power drawn (maximum demand) is significantly lower than the total connected load, as determined by the demand factor: Demand┬аFactor=ConnectedLoadMaximumDemandтАЛ.
Connected load is independent of the time of usage or diversity factor.
Higher connected loads typically require a three-phase supply, whereas smaller residential loads use single-phase.
Actual energy consumption is based on the demand factor and utilization duration, not the total connected load.
Helps utility companies in sizing service lines and transformers.
Provides a baseline for establishing tariff structures.
Does not reflect actual instantaneous power consumption.
Leads to overestimation of transformer capacity if diversity is ignored.
Residential electrification planning.
Utility billing and load forecasting.
Domestic consumers usually have a demand factor ranging between 0.3 and 0.6.
Options B and C (10-30 kW) are generally categorized under commercial or light industrial load rather than standard domestic connections.
A is correct тАФ The standard connected load for a domestic residence in India typically falls between 1 kW and 5 kW.
Always remember that 'Connected Load' refers to the sum of ratings, while 'Maximum Demand' refers to the highest power drawn over a specified period; the former is always greater than or equal to the latter.