Join 60,000+ competitive exam aspirants
During summer season load on the system increases this is due to
Increase in demand of water supply
Increased the business activity
Increased use of fan air coolers and air conditioners
Vacations in schools and Institution
Increased use of fan air coolers and air conditioners
During the summer season, the load on the electrical power system increases significantly due to the collective high-power consumption of cooling appliances. These devices operate on inductive loads, leading to an increased demand for active and reactive power from the grid.
During the summer season, the load on the electrical power system increases significantly due to the collective high-power consumption of cooling appliances. These devices operate on inductive loads, leading to an increased demand for active and reactive power from the grid.
PTotalтАЛ=тИСi=1nтАЛPiтАЛтЛЕDiтАЛ тАФ Total load calculation where DiтАЛ is the demand factor of the ith load
Q=VтЛЕIsin(╧Х) тАФ Reactive power demand increased by inductive cooling motors
The principle involves the aggregate load demand on the distribution transformer and feeder lines. Cooling devices like air conditioners (ACs) and air coolers utilize electric motors (induction motors) for compressors and fans. When ambient temperatures rise, the duty cycle of these motors increases, raising the peak demand and decreasing the system power factor due to the inductive nature of the motors.
Increased ambient temperature leads to longer compressor run-times.
Air conditioners represent a high-wattage load typically categorized as motor-driven.
The cumulative effect causes a spike in the evening peak demand (Load Curve).
Voltage stability issues may arise due to heavy inductive loading during peak summer hours.
Higher revenue generation for utility companies due to increased energy sales
Stimulation of upgrades in grid capacity and infrastructure
Increased risk of transformer overloading and failure
Transmission and distribution losses increase as I2R losses rise with higher current flow
Residential climate control
Commercial space cooling systems
Grid balancing and load forecasting models
The peak demand in many regions follows a seasonal pattern directly correlated with the 'Temperature-Load' coefficient.
Option A (Water supply) might increase, but it is not the primary driver for the sharp seasonal load spike seen in power systems compared to climate control.
Option D (Vacations) often shifts the load timing (from morning to afternoon) rather than causing the net increase associated with cooling.
C is correct тАФ The widespread simultaneous use of inductive cooling appliances significantly elevates the power system's total load demand.
Always remember that in power systems, motor-driven loads are sensitive to voltage dips; high summer loads often lead to voltage drops, which further increase current in constant-power loads, potentially leading to instability.