Join 60,000+ competitive exam aspirants
When an alternator is delivering a balanced load at unity power factor, the phase angle between line voltage and line current is
90°
60°
30°
0°
30°
In a star-connected (wye) alternator, when delivering a balanced load at unity power factor, the line voltage (VL) is 3 times the phase voltage (Vph), and the line current (IL) is equal to the phase current (Iph). Due to the 30° displacement between phase voltage and line voltage in a star configuration, the line voltage leads the phase voltage by 30°.
In a star-connected (wye) alternator, when delivering a balanced load at unity power factor, the line voltage (VL) is 3 times the phase voltage (Vph), and the line current (IL) is equal to the phase current (Iph). Due to the 30° displacement between phase voltage and line voltage in a star configuration, the line voltage leads the phase voltage by 30°.
VL=3Vph — Relationship between line and phase voltage in star connection
IL=Iph — Relationship between line and phase current in star connection
ϕ=cos−1(pf) — Phase angle of the load
In a three-phase star connection, the line voltage is defined as the phasor difference between two phase voltages (e.g., VRY=VR−VY). Since these phase voltages are displaced by 120°, their difference results in a magnitude of 3Vph and a phase shift of 30° relative to the phase voltage. At unity power factor, the phase current is in phase with the phase voltage, causing the line voltage to be displaced by 30° from the line current.
The 30° phase shift is intrinsic to the star (wye) connection geometry.
At unity power factor, current is in phase with the phase voltage (Vph), not the line voltage (VL).
This shift must be accounted for in industrial metering and protection relay configurations.
Provides two different voltage levels (Phase and Line).
Suitable for distribution systems with neutral availability.
Requires careful consideration of phase-to-line angle shifts in measurement.
Higher insulation requirement for line-to-line voltage.
Three-phase industrial alternators
Power distribution transformers
For a delta connection, the line current leads/lags the phase current by 30°, while the line voltage equals the phase voltage.
Option A (90°) occurs in purely reactive loads.
Option D (0°) is the angle between phase voltage and phase current at unity power factor.
C is correct — In a star-connected system, the line voltage is displaced by 30° from the phase voltage, resulting in a 30° angle between line voltage and line current at unity power factor.
Always verify whether the alternator winding is connected in Star or Delta before determining phase-to-line shifts; this is a high-frequency trap in GATE/IES.