Join 60,000+ competitive exam aspirants
In moderate size steam power station, electric power is generated at
440 kV
kV
11 kV
33 kV
11 kV
In moderate-sized steam power stations, the electric power is typically generated at 11 kV. This voltage level is chosen as an optimum balance between the insulation requirements of the generator windings and the cost-effectiveness of the step-up transformer installations.
In moderate-sized steam power stations, the electric power is typically generated at 11 kV. This voltage level is chosen as an optimum balance between the insulation requirements of the generator windings and the cost-effectiveness of the step-up transformer installations.
P=3тАЛVLтАЛILтАЛcos╧Х тАФ Power output equation representing current magnitude requirements
The design of an alternator involves a trade-off between insulation thickness and copper conductor size. Generating at a low voltage like 11 kV allows for manageable insulation thickness within the stator slots while keeping the current levels reasonably low. If the voltage were significantly higher, the required insulation would increase the slot size and the overall machine dimensions, making it economically unfeasible.
Most alternators are designed for generation voltages between 3.3 kV and 33 kV.
11 kV is the most standardized voltage in India for medium-capacity thermal plants.
Generation voltage is restricted by the dielectric strength of stator slot insulation.
Higher generation voltages lead to increased cost of stator winding insulation.
Optimized insulation cost
Balanced machine dimensions
Standardized protection relay ranges
Requires high-power step-up transformers for long-distance transmission
High current values necessitate large busbar sections
Thermal power plants
Hydel power plants
Captive power generation
While 11 kV is common, some very large units generate at up to 25 kV or 33 kV to reduce the current and consequently the size of the outgoing heavy-current leads.
Option A (440 kV) is a standard transmission voltage, not a generation voltage.
Option D (33 kV) is sometimes used for large capacity units but is not the standard for moderate size stations.
C is correct тАФ In moderate steam power stations, electricity is generated at 11 kV to optimize insulation and conductor size requirements.
Always remember that generation voltage is limited by mechanical and dielectric constraints, whereas transmission voltage is determined solely by power transmission efficiency (P \propto V┬▓).