Join 60,000+ competitive exam aspirants
The curve that is generally used to avoid the obstructions like hard rocks, deep cuttings, soft gradients is called _________.
transitional curve
compound curve
simple curve
parabolic curve
compound curve
A compound curve consists of two or more simple circular curves of different radii curving in the same direction with a common tangent at their junction. It is specifically employed in highway and railway engineering to navigate challenging terrain by adjusting the alignment to circumvent physical obstacles like hard rocks, deep valleys, or cuttings while maintaining a specific gradient.
IRC:73-1980
A compound curve consists of two or more simple circular curves of different radii curving in the same direction with a common tangent at their junction. It is specifically employed in highway and railway engineering to navigate challenging terrain by adjusting the alignment to circumvent physical obstacles like hard rocks, deep valleys, or cuttings while maintaining a specific gradient.
T1тАЛ=R1тАЛtan(2╬Ф1тАЛтАЛ) тАФ Tangent length for the first arc
T2тАЛ=R2тАЛtan(2╬Ф2тАЛтАЛ) тАФ Tangent length for the second arc
╬Ф=╬Ф1тАЛ+╬Ф2тАЛ тАФ Total deflection angle
The curve is formed by placing two circular arcs of radii R1тАЛ and R2тАЛ tangent to each other at the point of compound curvature (PCC). By varying the radii and the central angles of these constituent arcs, engineers can achieve a flexible alignment that hugs the natural contours of the land, minimizing the need for extensive excavation or bridge structures.
Used when the radius of a simple curve cannot satisfy the geometric constraints of the site.
The two arcs lie on the same side of the common tangent.
Provides flexibility in layout compared to simple or reverse curves.
The transition between different radii must be managed to ensure driver comfort and safety.
Greater flexibility in fitting the curve to natural ground conditions.
Reduces the cost of earthwork and land acquisition in difficult terrains.
More complex to set out in the field compared to a simple curve.
Potential for sudden changes in centrifugal force if radii differences are too large.
Mountainous or hilly terrain navigation.
Avoiding natural obstacles such as water bodies or massive rock outcroppings.
Compound curves are primarily used when the total deflection angle is large and a single radius is not feasible.
Option A is used for gradual change in centrifugal force, Option C is a single arc, and Option D is typically used for vertical alignments.
B is correct тАФ A compound curve allows the horizontal alignment to be adjusted by varying radii to suit site-specific obstructions.
In exams, remember that if the question mentions 'avoiding obstacles' or 'fitting terrain,' look for 'compound curve'; if it mentions 'superelevation' or 'comfort,' look for 'transition curve'.