Join 60,000+ competitive exam aspirants
The device used as a switch in a modern DC chopper circuit is typically a ________.
Thyristor
IGBT
Diode
Vacuum Tube
IGBT
In modern DC chopper circuits, the Insulated Gate Bipolar Transistor (IGBT) is typically used as the main switching device. It combines the high input impedance of a MOSFET with the low on-state conduction loss of a BJT, making it ideal for high-frequency switching in the typical chopper operating range of 1тАУ25 kHz.
In modern DC chopper circuits, the Insulated Gate Bipolar Transistor (IGBT) is typically used as the main switching device. It combines the high input impedance of a MOSFET with the low on-state conduction loss of a BJT, making it ideal for high-frequency switching in the typical chopper operating range of 1тАУ25 kHz.
VoтАЛ=D├ЧVsтАЛ тАФ Average output voltage of a step-down (Buck) chopper, where D is duty cycle
D=TTonтАЛтАЛ=TonтАЛ+ToffтАЛTonтАЛтАЛ тАФ Duty cycle definition
PlossтАЛ=Ion2тАЛ├ЧRonтАЛ+21тАЛVcesтАЛ├ЧIcsтАЛ├Ч(tonтАЛ+toffтАЛ)├Чf тАФ Total IGBT power loss (conduction + switching)
An IGBT is a voltage-controlled, three-terminal power semiconductor device (Gate, Collector, Emitter). When a positive gate-emitter voltage (VGEтАЛ) above the threshold is applied, the device turns ON and allows current flow from collector to emitter. When VGEтАЛ is removed or made negative, the device turns OFF. This rapid ON-OFF cycling at high frequency controls the average output voltage of the chopper according to VoтАЛ=D├ЧVsтАЛ, where D is the duty cycle and VsтАЛ is the input DC source voltage.
IGBT is a hybrid device combining MOSFET input characteristics with BJT output characteristics, offering high input impedance and low conduction loss
Typical chopper switching frequency range: 1 kHz to 25 kHz; IGBTs are optimal in this medium-to-high power range
The turn-on/turn-off time of an IGBT is in the range of hundreds of nanoseconds, enabling efficient high-frequency operation
High input impedance allows simple gate drive circuitry (voltage-controlled)
Low on-state voltage drop (VCE(sat)тАЛтЙИ2тАУ3 V) compared to MOSFETs at higher voltages
Excellent switching speed suitable for chopper frequencies of 1тАУ25 kHz
High current and voltage handling capability (typically up to 600 A, 6.5 kV)
Higher switching losses than MOSFETs at very high frequencies (>50 kHz)
Minor tail current during turn-off leads to slightly slower switching compared to pure MOSFETs
Requires negative gate voltage for reliable turn-off in some applications
DC motor speed control using choppers
Switched-mode power supplies (SMPS)
Electric vehicle traction drives
Uninterruptible Power Supplies (UPS)
Option A (Thyristor): Thyristors (SCRs) are current-controlled devices requiring a gate pulse for turn-on AND a commutation circuit for turn-off. They are unsuitable for forced commutation in high-frequency choppers due to slow switching (turn-off time ~50тАУ100 ┬╡s), though GTOs and ETOs are variants used in very high-power applications.
Option C (Diode): A diode is a passive two-terminal device that conducts only in one direction; it cannot act as a controlled switch and is used as a freewheeling diode in chopper circuits, not as the main switch.
Option D (Vacuum Tube): Vacuum tubes are obsolete for power electronic switching due to extremely low switching speeds, high power consumption, and large physical size.
Option B (IGBT) is correct тАФ IGBTs are the preferred switching devices in modern DC choppers due to their fast switching, high input impedance, and low conduction losses in the medium-to-high power range.
For exam purposes: Remember that IGBT dominates the 200 V тАУ 650 V, up to ~10 kW chopper application range. Above this, MOSFETs are used for low-voltage/high-frequency; below this, SCRs/GTOs handle very high-power applications. Also recall that a freewheeling diode (FWD) is always connected across the load in inductive-load choppers.