Join 60,000+ competitive exam aspirants
The draft tube is provided to
Raise the water surface of the stream to create an artificial head
Reduce the effect of water hammer
Increase the acting head on the water wheel
None of the above
Increase the acting head on the water wheel
A draft tube is a diverging conduit that connects the runner exit of a reaction turbine (like Francis or Kaplan) to the tailrace. Its primary function is to recover the kinetic energy of the water leaving the runner, thereby converting it into pressure energy and increasing the effective head acting on the turbine.
A draft tube is a diverging conduit that connects the runner exit of a reaction turbine (like Francis or Kaplan) to the tailrace. Its primary function is to recover the kinetic energy of the water leaving the runner, thereby converting it into pressure energy and increasing the effective head acting on the turbine.
HeffectiveтАЛ=HnetтАЛ+hsтАЛ тАФ where hsтАЛ is the vacuum pressure head recovered by the draft tube.
P1тАЛ+21тАЛ╧Бv12тАЛ=P2тАЛ+21тАЛ╧Бv22тАЛ тАФ application of Bernoulli's principle where A2тАЛ>A1тАЛ.
The draft tube works on the principle of BernoulliтАЩs equation. By gradually increasing the cross-sectional area in the direction of flow, the velocity of the water decreases (V2тАЛ<V1тАЛ), which causes a corresponding increase in pressure (P2тАЛ>P1тАЛ). This sub-atmospheric pressure at the runner exit effectively creates an additional 'suction head' equivalent to the difference in pressure, thus enhancing the overall efficiency.
Used exclusively in reaction turbines.
Allows the turbine to be set above the tailrace level without sacrificing head.
Minimizes kinetic energy loss at the turbine exit.
Prevents cavitation by maintaining controlled pressure distribution.
Increases turbine efficiency.
Provides flexibility in turbine installation elevation.
Increases the complexity and cost of the substructure.
Risk of cavitation if the draft tube exit is too high.
Francis Turbines
Kaplan/Propeller Turbines
Option A is incorrect because it relates to barrages or weirs.
Option B is incorrect because water hammer protection is provided by surge tanks.
Draft tubes are generally conical or elbow-shaped.
C is correct тАФ The draft tube converts the residual kinetic energy of water exiting the runner into pressure energy, thereby increasing the effective head.
Always remember that the draft tube is a characteristic feature of reaction turbines, whereas impulse turbines (like Pelton wheels) vent to the atmosphere and do not utilize draft tubes.