Join 60,000+ competitive exam aspirants
The following is the data sheet from a levelling book. The INCORRECT option is _______. BS = Back Sight, HI=Height of instrument, IS = Intermediate Sight, FS = Fore Sight, RL =Reduced Level, BM = Bench Mark and CP = Change Point) (All figures are in metre.)
RL of Station U is 142.35 m
HI at Station R is 146.55 m
HI at Station T is 145.90 m
RL of Station S is 144.30 m
RL of Station U is 142.35 m
To determine the incorrect option, we perform a stepwise calculation of the Height of Instrument (HI) and Reduced Level (RL) for each station using the Height of Instrument method. Starting from the Bench Mark at Q (RL = 150 m) with a BS of тИТ3.45 m, the initial HI is calculated as HI=RL+BS.
To determine the incorrect option, we perform a stepwise calculation of the Height of Instrument (HI) and Reduced Level (RL) for each station using the Height of Instrument method. Starting from the Bench Mark at Q (RL = 150 m) with a BS of тИТ3.45 m, the initial HI is calculated as HI=RL+BS.
HI=RL+BS
RL=HIтИТIS
RL=HIтИТFS
The HI method relies on calculating the height of the line of collimation above the datum for each instrument setup. HI=Previous┬аRL+BS. Once HI is determined, RL=HIтИТIS or RL=HIтИТFS. Each time a BS is taken, a new HI is established from the previous RL of the Change Point (CP).
Station Q: RL=150, BS=тИТ3.45. Thus, HI1тАЛ=150+(тИТ3.45)=146.55 m.
Station R: IS=2.60. RLRтАЛ=146.55тИТ2.60=143.95 m.
Station S: FS=2.25. RLSтАЛ=146.55тИТ2.25=144.30 m.
Station S (New setup): BS=1.60. HI2тАЛ=144.30+1.60=145.90 m.
Station T: IS=1.85. RLTтАЛ=145.90тИТ1.85=144.05 m.
Station U: FS=1.70. RLUтАЛ=145.90тИТ1.70=144.20 m.
Station U (New setup): BS=2.15. HI3тАЛ=144.20+2.15=146.35 m.
Station V: FS=тИТ2.35. RLVтАЛ=146.35тИТ(тИТ2.35)=148.70 m.
Calculation of HI is simple and less prone to arithmetic errors for intermediate points.
Easily verifiable using the arithmetic check: тИСBSтИТтИСFS=Last┬аRLтИТFirst┬аRL.
Errors in HI calculation are carried forward to all subsequent points in that instrument setup.
Does not provide a check for individual RLs unless the arithmetic check is performed at the end.
Profile and cross-sectional leveling.
Establishment of reduced levels for construction projects.
Option A is incorrect because the calculated RL of Station U is 144.20 m, not 142.35 m.
Option B is correct because HI at Station R is defined by the instrument setup at Q, giving 146.55 m.
Option C is correct because HI at Station T is defined by the instrument setup at S, giving 145.90 m.
Option D is correct because RL of S = 146.55 - 2.25 = 144.30 m.
A is correct тАФ The calculated RL of Station U is 144.20 m, making 142.35 m incorrect.
Always remember that a negative reading on a staff represents a point above the line of collimation, which is common in soffit or ceiling leveling.