Join 60,000+ competitive exam aspirants
Which of the following staff readings is/are taken at a turning point, that necesiates instruments change point in levelling work? A)Fore sight B)Back sight C)Intermediate sight
Only B
Both A and C
Both A and B
Only A
Both A and B
A turning point (also known as a change point) is a point where both a Fore Sight (FS) and a Back Sight (BS) are taken from different instrument stations to maintain continuity in levelling. The FS is the last reading taken from the current instrument position, and the BS is the first reading taken from the next instrument position on the same point.
A turning point (also known as a change point) is a point where both a Fore Sight (FS) and a Back Sight (BS) are taken from different instrument stations to maintain continuity in levelling. The FS is the last reading taken from the current instrument position, and the BS is the first reading taken from the next instrument position on the same point.
Reduced┬аLevel┬а(RL)=Height┬аof┬аInstrument┬а(HI)тИТStaff┬аReading
Arithmetic┬аCheck=тИСBSтИТтИСFS=Last┬аRLтИТFirst┬аRL
When the line of sight must be shifted due to large elevation differences or distance, the instrument is moved. To link the levels of the old and new stations, a staff reading is taken on a stable object (Turning Point) before moving the instrument (FS) and immediately after setting it up at the new position (BS).
Turning point signifies the shift of the leveling instrument to a new location.
The FS is the last sight taken from an instrument station before it is moved.
The BS is the first sight taken from a new instrument station to establish the height of the instrument.
Intermediate Sights (IS) are readings taken between BS and FS for points whose RL is required.
Ensures continuity of leveling over long distances.
Allows measurement of elevation on uneven terrain.
Increases the possibility of cumulative errors.
Requires additional time for equipment relocation.
Longitudinal leveling of roads and railways.
Contour mapping in undulating topography.
A turning point essentially serves as a temporary benchmark.
Intermediate sights are never taken at a turning point because an IS is a point of unknown elevation where only one reading is observed.
C is correct тАФ Both Fore sight and Back sight are mandatory readings recorded at a turning point to facilitate the transfer of the level from one setup to the next.
Always remember the simple mnemonic: BS is always the first reading after setup, and FS is always the last reading before relocation.