Join 60,000+ competitive exam aspirants
Which of the following is correct expression to find the hypotenusal allowance used to compute horizontal distance on a sloping ground?, where ╞Я=Angle of sloped ground
Measured length on sloped ground(1-cos╬╕)2
Measured length on sloped ground(1-cos╬╕)
Measured length on sloped ground(1-Sec╬╕)2
Measured length on sloped ground(Sec╬╕тИТ1)
Measured length on sloped ground(Sec╬╕тИТ1)
Hypotenusal allowance is the correction applied to the measured length on a slope to obtain the corresponding horizontal distance. Since the measured length (L) represents the hypotenuse of a right-angled triangle, the horizontal distance is Lcos(╬╕), so the correction (allowance) required to reduce it to the horizontal plane is LтИТLcos(╬╕), which simplifies to L(sec(╬╕)тИТ1).
IS 15888:2008 (General practice for surveying)
Hypotenusal allowance is the correction applied to the measured length on a slope to obtain the corresponding horizontal distance. Since the measured length (L) represents the hypotenuse of a right-angled triangle, the horizontal distance is Lcos(╬╕), so the correction (allowance) required to reduce it to the horizontal plane is LтИТLcos(╬╕), which simplifies to L(sec(╬╕)тИТ1).
Horizontal┬аDistance=Lcos(╬╕)
Hypotenusal┬аAllowance=L(sec(╬╕)тИТ1)
In surveying, measurements are typically required along the horizontal plane. When measuring along a slope of angle ╬╕, the chain or tape follows the slope length (L), resulting in an error because the horizontal projection is Lcos(╬╕). To compensate for the excess distance measured along the slope compared to the horizontal, an allowance is subtracted from the sloped measurement.
The hypotenusal allowance is used primarily in chaining on sloped ground.
As the angle of slope ╬╕ increases, the required allowance also increases.
It converts the measured slope distance into a horizontal distance.
Simplifies field measurement procedures on hilly terrains.
Reduces errors in horizontal mapping.
Requires accurate measurement of the slope angle ╬╕.
Only applicable for small to moderate slopes before sag corrections become dominant.
Topographic surveying on inclined ground.
Highway and railway alignment surveys.
The term 'Allowance' implies the extra length that must be compensated to achieve the true horizontal distance.
Option B represents the difference between the slope length and the horizontal distance only if the formula was L(1тИТcos(╬╕)), which is not the correct representation for the hypotenusal allowance.
D is correct тАФ The hypotenusal allowance is calculated as L(sec(╬╕)тИТ1) to adjust the measured slope length to horizontal distance.
Remember that for very small angles, sec(╬╕)тИТ1тЙИ2╬╕2тАЛ in radians, which is a useful approximation for quick field mental math.