Join 60,000+ competitive exam aspirants
The function of air pumps in a condenser is to
Remove water
Air leaking into the condenser and maintain vacuum
Maintain atmospheric pressure in the condenser
Both (a) and (b)
Air leaking into the condenser and maintain vacuum
The primary function of an air pump (often referred to as an air ejector or vacuum pump) in a steam power plant condenser is to remove non-condensable gases, such as air, that leak into the system through seals and joints. By removing these gases, the air pump prevents the partial pressure of air from increasing, which is essential to maintain the high vacuum required for efficient turbine operation.
The primary function of an air pump (often referred to as an air ejector or vacuum pump) in a steam power plant condenser is to remove non-condensable gases, such as air, that leak into the system through seals and joints. By removing these gases, the air pump prevents the partial pressure of air from increasing, which is essential to maintain the high vacuum required for efficient turbine operation.
PtotalтАЛ=PsteamтАЛ+PairтАЛ тАФ Dalton's Law representing the impact of air on condenser vacuum
In a surface condenser, steam condenses into liquid water, which is removed by the condensate extraction pump. However, air dissolved in boiler feedwater or leaking through turbine glands accumulates in the condenser shell. Since air is non-condensable, its presence increases the total pressure according to Dalton's Law of Partial Pressures (PtotalтАЛ=PsteamтАЛ+PairтАЛ). The air pump creates a suction pressure lower than the condenser internal pressure to extract these gases, thereby keeping the condenser vacuum close to the saturation pressure of the steam.
Non-condensable gases inhibit heat transfer by forming an insulating layer on condenser tubes.
The presence of air significantly lowers the vacuum efficiency, thereby increasing the heat rate of the power plant.
Air pumps are typically steam jet ejectors or liquid ring vacuum pumps.
Maintenance of a high vacuum is crucial to maximize the enthalpy drop across the turbine.
Increases the efficiency of the Rankine cycle by lowering the turbine back pressure.
Reduces corrosion risk by removing oxygen and other non-condensable gases from the cycle.
Adds auxiliary power consumption to the plant.
Requires periodic maintenance to ensure air-tightness of the system.
Thermal Power Plants
Nuclear Power Plants
Vacuum Distillation Columns
Dalton's law dictates that the total pressure in the condenser is the sum of the partial pressures of steam and air.
Option A is incorrect because water is removed by a condensate pump, not an air pump.
Option C is incorrect because a condenser operates at sub-atmospheric pressure (vacuum), not atmospheric pressure.
B is correct тАФ Air pumps are essential to extract non-condensable air leakage, ensuring the maintenance of the condenser vacuum.
Always remember that in thermodynamics, the presence of non-condensable gases is a 'parasitic' effect that directly lowers thermal efficiency by preventing steam from condensing fully at the expected saturation temperature.