Join 60,000+ competitive exam aspirants
Wet air pump is to remove
Condensate only
Air only
Both air and condensate
Vapour from the condenser
Both air and condensate
A wet air pump is a type of vacuum pump specifically designed to remove both the air and the condensate from the condenser of a steam power plant. By extracting both simultaneously, it helps in maintaining the vacuum necessary for efficient steam turbine operation.
A wet air pump is a type of vacuum pump specifically designed to remove both the air and the condensate from the condenser of a steam power plant. By extracting both simultaneously, it helps in maintaining the vacuum necessary for efficient steam turbine operation.
PtotalтАЛ=PcondensateтАЛ+PairтАЛ тАФ Total pressure within the condenser as governed by Dalton's law of partial pressures.
The wet air pump operates on a reciprocating or rotary displacement principle where the volume change allows it to draw in a mixture of water (condensate) and air. Since air is non-condensable, its accumulation increases the backpressure in the condenser; the pump removes this air and the condensed steam to maintain the required pressure differential across the turbine.
Wet air pumps handle the fluid mixture (liquid and gas) in a single stage.
They are typically used in smaller installations or older power plants.
Non-condensable air acts as an insulator, reducing the heat transfer rate in the condenser.
Removal of air is critical for maintaining high thermal efficiency of the Rankine cycle.
Simplicity in design
Single pump handles both phases
High wear and tear due to moisture
Lower volumetric efficiency compared to dry air pumps
Limited capacity for high-vacuum applications
Small capacity steam power plants
Marine steam propulsion systems
Industrial condensing units
In modern large-capacity power plants, 'Dry' air pumps (e.g., steam jet ejectors) are preferred to handle air separately from the condensate pumps.
Option A is incorrect because the pump must also remove non-condensable gases to maintain vacuum.
Option B is incorrect as it would leave the condensate behind, causing flooding of the condenser.
C is correct тАФ The wet air pump is specifically designed to simultaneously handle and remove both the air (non-condensables) and the condensate from a steam condenser.
Always remember that in thermodynamics, the presence of air in a steam condenser drastically reduces the overall heat transfer coefficient (U), making vacuum extraction a critical maintenance task for efficiency.