Join 60,000+ competitive exam aspirants
The function of reflector in a nuclear reactor is to
Bounce back most of the neutrons that escape from the fuel core
Reduce the speed of the neutrons
Stop the chain reaction
All of above
Bounce back most of the neutrons that escape from the fuel core
A reflector in a nuclear reactor is a material placed around the fuel core that scatters back neutrons that would otherwise leak out of the core. By reflecting these neutrons back into the core, it improves the neutron economy, allowing for a smaller critical mass and more efficient utilization of fissile material.
A reflector in a nuclear reactor is a material placed around the fuel core that scatters back neutrons that would otherwise leak out of the core. By reflecting these neutrons back into the core, it improves the neutron economy, allowing for a smaller critical mass and more efficient utilization of fissile material.
P=╬гsтАЛ╬╗trтАЛ1тАЛ тАФ where ╬гsтАЛ is scattering cross-section and ╬╗trтАЛ is transport mean free path, relating to reflector efficiency
The reflector works via elastic scattering collisions between the escaping neutrons and the nuclei of the reflector material. Materials with a high scattering cross-section and low absorption cross-section, such as graphite, beryllium, or light water, are preferred. By returning neutrons to the core, the reflector increases the neutron flux density and helps maintain the chain reaction in the fuel region.
Reflectors reduce neutron leakage from the reactor core.
They effectively reduce the critical mass of fuel required for criticality.
Common materials include graphite, Beryllium (Be), and heavy water (D2тАЛO).
A good reflector must have high scattering cross-section and very low neutron absorption.
Increases neutron economy and fuel efficiency.
Flattens the neutron flux profile across the core.
Reduces the physical size of the reactor required for criticality.
Increases the overall volume and mass of the reactor structure.
Reflector materials may suffer from radiation damage over long periods.
Potential for increased neutron capture if the material is not highly pure.
Thermal nuclear reactors (e.g., Graphite-moderated reactors).
Fast breeder reactors (often using metals as reflectors).
Option B is incorrect because neutron speed reduction is the function of the moderator, not the reflector.
Option C is incorrect because stop mechanism is performed by control rods.
The reflector typically surrounds the core radially and at the ends (axial reflectors).
A is correct тАФ The primary function of a reflector is to bounce back neutrons escaping the fuel core, thereby increasing neutron economy.
Always distinguish between moderators (which slow down neutrons) and reflectors (which redirect them) in nuclear reactor questions.