Join 60,000+ competitive exam aspirants
Which of the following materials can be used as a coolant?
Heavy water
CO2тАЛ
Helium
Any of above
Any of above
In nuclear reactors, coolants are fluids used to remove the heat generated by the fission process in the core. Materials like heavy water (D2тАЛO), gases (CO2тАЛ), and inert gases (Helium) are widely used due to their thermal properties, low absorption cross-section for neutrons, and chemical stability.
In nuclear reactors, coolants are fluids used to remove the heat generated by the fission process in the core. Materials like heavy water (D2тАЛO), gases (CO2тАЛ), and inert gases (Helium) are widely used due to their thermal properties, low absorption cross-section for neutrons, and chemical stability.
Q=m╦ЩCpтАЛ╬ФT тАФ Heat transfer equation where m╦Щ is mass flow rate, CpтАЛ is specific heat, and ╬ФT is temperature difference
The primary coolant circulates through the reactor core, absorbing thermal energy from fuel rods via convection. This heat is transferred to a secondary fluid (usually water) in a heat exchanger (steam generator) to produce steam, which then drives the turbine-generator set in a power plant.
Heavy water (D2тАЛO) is an excellent coolant and moderator because it has a very low neutron absorption cross-section.
Gaseous coolants like CO2тАЛ are used in Advanced Gas-cooled Reactors (AGR) due to their high thermal stability.
Helium is preferred in High-Temperature Gas-cooled Reactors (HTGR) because it is chemically inert and has high thermal conductivity.
High thermal conductivity for efficient heat transfer.
Low neutron activation to minimize radioactivity in the primary loop.
Compatibility with structural materials at high temperatures.
Pressurization requirements for gas coolants to maintain density.
Corrosion potential if impurities are present in the coolant cycle.
Pressurized Heavy Water Reactors (PHWR)
Advanced Gas-cooled Reactors (AGR)
High-Temperature Gas-cooled Reactors (HTGR)
Coolants are chosen based on their thermodynamic efficiency, neutron economy, and physical safety (e.g., non-flammability).
Heavy water is both a moderator and a coolant in CANDU reactors.
D is correct тАФ All listed substances (Heavy water, CO2тАЛ, and Helium) serve effectively as reactor coolants depending on the specific design requirements.
Always remember that in reactor design, the choice of coolant must satisfy both thermodynamic criteria and neutronic requirements (minimal neutron absorption).