Join 60,000+ competitive exam aspirants
The gas turbine power plant can be used in combination with steam power plants by
Using exhaust gases from gas turbine power plant in heating of feed water coming from the steam turbine condenser
Using exhaust gases from gas turbine power plant as combustion air in steam boiler
Using gas from a supercharged boiler for expansion in gas turbine
Any of above
Any of above
A combined cycle power plant integrates a gas turbine and a steam turbine to achieve higher thermal efficiency by utilizing the waste energy from the gas turbine cycle. The exhaust gases of a gas turbine are at a high temperature (typically 400┬░C to 600┬░C), which provides an excellent heat source for steam generation or feed water heating.
A combined cycle power plant integrates a gas turbine and a steam turbine to achieve higher thermal efficiency by utilizing the waste energy from the gas turbine cycle. The exhaust gases of a gas turbine are at a high temperature (typically 400┬░C to 600┬░C), which provides an excellent heat source for steam generation or feed water heating.
╬╖combinedтАЛ=1тИТ(1тИТ╬╖gтАЛ)(1тИТ╬╖sтАЛ) тАФ Overall efficiency of combined cycle
QrecoveredтАЛ=m╦ЩgтАЛcpтАЛ(TexhaustтАЛтИТTambientтАЛ) тАФ Heat energy recovered from exhaust
In the combined cycle configuration, the gas turbine serves as the topping cycle, and the steam cycle acts as the bottoming cycle. Heat energy, which would otherwise be rejected to the atmosphere as waste heat, is recovered by a Heat Recovery Steam Generator (HRSG) to produce steam. This improves the overall plant efficiency, which is calculated as ╬╖combinedтАЛ=╬╖gasтАЛ+╬╖steamтАЛтИТ(╬╖gasтАЛтЛЕ╬╖steamтАЛ).
Combined cycles leverage the high-temperature exhaust of Brayton cycles.
The HRSG allows for flexibility in using exhaust for both feedwater heating and steam generation.
Combined cycle plants can reach efficiencies exceeding 60%, compared to 35-40% for simple steam plants.
Significantly higher thermal efficiency.
Reduced environmental impact per unit of power generated.
Lower fuel consumption compared to simple cycle plants.
Higher capital investment costs.
Increased system complexity in controls and operation.
Requirement for high-grade natural gas.
Large scale grid power generation.
Cogeneration (Combined Heat and Power - CHP) plants.
Industrial plants requiring high process steam.
Supercharged boilers (Option C) use the gas turbine to supply compressed air to the boiler, making the steam generator a part of the gas turbine cycle.
All three methods represent valid integration strategies to extract maximum enthalpy from the gas turbine exhaust stream.
D is correct тАФ The gas turbine and steam power plant can be integrated in multiple configurations (using exhaust for heating, air supply, or pressure-boosting) to improve the thermodynamic efficiency of the combined system.
Remember that the 'Combined Cycle' always pairs a gas turbine (high temp) with a steam turbine (low temp) to maximize the Carnot efficiency limit.