Join 60,000+ competitive exam aspirants
Coal and peat is not generally used in gas turbines as fuel because of
Coal handling and ash handling problems
Their higher costs
Their nonavailability
All of above
Coal handling and ash handling problems
Coal and peat are solid fuels containing significant mineral matter and impurities that produce abrasive ash upon combustion. In a gas turbine, the combustion gases pass directly through high-speed turbine blades, where this ash causes severe erosion, corrosion, and fouling.
Coal and peat are solid fuels containing significant mineral matter and impurities that produce abrasive ash upon combustion. In a gas turbine, the combustion gases pass directly through high-speed turbine blades, where this ash causes severe erosion, corrosion, and fouling.
EтИЭv2тЛЕm тАФ where E is the kinetic energy of ash particles, v is velocity, and m is mass, representing erosive power.
In a gas turbine system, the working fluid (air-fuel mixture) must be clean to prevent damage to the turbine buckets. When solid fuels like coal or peat are used, the combustion process generates solid ash particles. Because these particles move at high velocities, they act like an abrasive blast on turbine blades, and the chemical nature of the ash leads to high-temperature corrosion, necessitating complex and expensive gas cleaning systems that make their use impractical compared to liquid or gaseous fuels.
Solid ash particles cause rapid erosion of turbine blades.
Alkali metals in coal ash cause high-temperature hot corrosion.
Gas turbines require very clean working fluids for longevity.
Cleaning systems (cyclones/filters) for coal gas are technically complex and costly.
High efficiency in combined cycle mode
Rapid start-up capability (with gas/liquid fuel)
Extreme susceptibility to fuel impurities
Requires high-quality refined fuels
Complex ash handling for solid fuels
Aviation propulsion
Industrial power generation (using natural gas)
Peak load power plants
Standard value: Gas turbine fuels typically require ash content to be less than 0.01% to prevent accelerated blade wear.
Option B (Cost) is partially true but secondary to the technical impossibility of running a standard gas turbine on raw solid fuel.
Option C (Availability) is incorrect as coal is globally abundant.
A is correct тАФ Solid fuels produce abrasive ash that leads to severe erosion and degradation of high-speed turbine blades.
In any question involving gas turbines, remember that they are 'clean' machinesтАФthey prioritize fuel purity to maintain the tight clearances and high-speed aerodynamics required for performance.