Join 60,000+ competitive exam aspirants
The gas turbine power plants mainly use
Coal and peat
Kerosene oil, diesel oil, residual oil
Gas oil
Natural gas and liquid petroleum fuels
Natural gas and liquid petroleum fuels
Gas turbine power plants utilize high-velocity gas flow to drive the turbine blades. The most suitable fuels are those that can be cleanly combusted to prevent blade erosion or fouling, primarily natural gas and light-to-medium liquid petroleum fuels like distillate oils.
Gas turbine power plants utilize high-velocity gas flow to drive the turbine blades. The most suitable fuels are those that can be cleanly combusted to prevent blade erosion or fouling, primarily natural gas and light-to-medium liquid petroleum fuels like distillate oils.
╬╖thтАЛ=1тИТrp(╬│тИТ1)/╬│тАЛ1тАЛ тАФ Ideal thermal efficiency of the Brayton cycle
WnetтАЛ=WturbineтАЛтИТWcompressorтАЛ тАФ Net work output
The Brayton cycle forms the basis of operation: air is compressed in an axial or centrifugal compressor, mixed with fuel in a combustion chamber where isobaric heat addition occurs, and finally expanded through the turbine to produce work. Natural gas is preferred for its high hydrogen-to-carbon ratio, leading to cleaner combustion and minimal residue buildup compared to heavy fuels.
Gas turbines are highly flexible and have very short start-up times.
Natural gas is the primary fuel due to its clean burning characteristics.
Distillate oils are used as secondary fuels where gas infrastructure is unavailable.
Blade maintenance is critical due to high-temperature corrosion from fuel impurities.
Rapid start-up and shutdown
High power-to-weight ratio
Low capital cost compared to steam plants
Lower thermal efficiency in simple cycle operation
High dependency on expensive refined fuels
Significant high-temperature material requirements
Peaking power plants for load management
Combined cycle power plants (CCPP) for base load
Coal is typically used in steam turbine plants, not gas turbines, due to ash content causing severe blade abrasion.
Residual oils require extensive fuel treatment (heating and purification) before use in gas turbines.
D is correct тАФ Gas turbine plants are optimized for fuels like natural gas and distillates that combust cleanly to protect delicate turbine blades.
Always remember: gas turbines prioritize 'clean' combustion, while steam power plants can utilize 'dirty' fuels like coal via boilers and heat exchangers.