Join 60,000+ competitive exam aspirants
Compressor used in gas turbine is
Reciprocating compressor
Screw compressor
Multistage axial flow compressor
Either (a) or (b)
Multistage axial flow compressor
Gas turbines require high mass flow rates of air to maintain the thermodynamic cycle, which is best achieved by multistage axial flow compressors. These compressors provide the high-pressure, continuous air flow necessary for stable combustion and efficient power extraction in large-scale turbine engines.
Gas turbines require high mass flow rates of air to maintain the thermodynamic cycle, which is best achieved by multistage axial flow compressors. These compressors provide the high-pressure, continuous air flow necessary for stable combustion and efficient power extraction in large-scale turbine engines.
WcтАЛ=m╦ЩCpтАЛ(T2тАЛтИТT1тАЛ) тАФ Compressor work input requirement
P1тАЛP2тАЛтАЛ=(T1тАЛT2тАЛтАЛ)╬│тИТ1╬│тАЛ тАФ Isentropic pressure-temperature relation
An axial flow compressor uses multiple rows of rotor and stator blades. The rotors impart kinetic energy to the air, while the stators diffuse this velocity into static pressure. By repeating this process across multiple stages, the air reaches the high compression ratios (typically 10:1 to 40:1) required for the Brayton cycle.
Axial compressors handle very high mass flow rates compared to centrifugal compressors.
The compression process in gas turbines typically follows a polytropic path to account for internal losses.
Multistage design is essential to achieve high pressure ratios without exceeding material velocity limits.
High efficiency for large power outputs
Compact frontal area reducing drag in aircraft applications
Capable of handling high mass flow rates
Complex manufacturing and maintenance
Sensitive to blade fouling and erosion
High cost of specialized blade materials
Jet engines for aircraft propulsion
Heavy-duty stationary industrial gas turbines
Marine propulsion systems
Axial flow compressors are the industry standard for gas turbines because centrifugal compressors cannot match the throughput and high pressure ratios required for power grid generation.
Options A and B (Reciprocating/Screw) are positive displacement compressors typically used for lower flow, higher pressure applications like air tools or chemical processing, which are inefficient for the high-volume requirements of gas turbines.
C is correct тАФ Multistage axial flow compressors are the primary choice for gas turbines due to their superior mass flow capacity and high-pressure performance.
Always remember that in power systems and propulsion, 'Axial' implies high mass flow and 'Centrifugal' implies high pressure rise per stage but lower total volume capacity.