Join 60,000+ competitive exam aspirants
The blades of gas turbines are made of
Stainless steel
Carbon steel
High alloy steel
High nickel alloy
High nickel alloy
Gas turbine blades are exposed to extreme temperatures and high centrifugal stresses during operation. High nickel alloys (superalloys) are chosen because they maintain their mechanical strength, creep resistance, and oxidation resistance at temperatures exceeding 1000┬░C.
Gas turbine blades are exposed to extreme temperatures and high centrifugal stresses during operation. High nickel alloys (superalloys) are chosen because they maintain their mechanical strength, creep resistance, and oxidation resistance at temperatures exceeding 1000┬░C.
TmaxтАЛтЙИ1500тИТ1700K
╧Г=AFтАЛ
The gas turbine operates on the Brayton cycle where high-pressure, high-temperature gases impinge upon the turbine blades. Nickel-based superalloys (such as Inconel or Nimonic) utilize a face-centered cubic matrix with a precipitated secondary phase (gamma-prime) which acts as a barrier to dislocation motion, providing exceptional high-temperature yield strength.
Nickel-based superalloys retain structural integrity near their melting points.
Creep deformation is the primary failure mode in rotating blades.
Directional solidification or single-crystal casting is often used for these blades.
Protective ceramic thermal barrier coatings (TBCs) are often applied over the alloy.
High strength-to-weight ratio at elevated temperatures.
Excellent resistance to oxidation and hot corrosion.
Expensive due to high nickel and cobalt content.
Difficult to machine and manufacture.
Jet aircraft engines.
Industrial power generation gas turbines.
Common materials include Inconel 718, Waspaloy, and Nimonic alloys.
Carbon steel and stainless steel lose strength rapidly above 500-600┬░C and would suffer catastrophic failure if used in the high-pressure turbine section.
D is correct тАФ High nickel alloys are specifically engineered to withstand extreme thermomechanical stress and oxidation in gas turbine environments.
In power systems, always associate high-temperature components with nickel-based superalloys, while looking for austenitic stainless steel for corrosion-prone, lower-temperature components.