Join 60,000+ competitive exam aspirants
The pressure ratio in a gas turbine power plant is
5 to 6
9 to 12
2 to 3
None of above
5 to 6
In a standard Brayton cycle-based gas turbine power plant, the pressure ratio (rpтАЛ) is typically maintained in the range of 5 to 6 for optimal thermal efficiency while avoiding excessively high compressor discharge temperatures. This ratio balances the work input requirement of the compressor against the net power output of the turbine.
In a standard Brayton cycle-based gas turbine power plant, the pressure ratio (rpтАЛ) is typically maintained in the range of 5 to 6 for optimal thermal efficiency while avoiding excessively high compressor discharge temperatures. This ratio balances the work input requirement of the compressor against the net power output of the turbine.
rpтАЛ=P1тАЛP2тАЛтАЛ тАФ Definition of pressure ratio
╬╖thтАЛ=1тИТrp(╬│тИТ1)/╬│тАЛ1тАЛ тАФ Thermal efficiency of an ideal Brayton cycle
The gas turbine operates on the Brayton cycle, where air is compressed, heated at constant pressure, and expanded through a turbine. The cycle thermal efficiency is given by ╬╖=1тИТrp(╬│тИТ1)/╬│тАЛ1тАЛ. While higher pressure ratios increase theoretical efficiency, physical constraints like material temperature limits and turbine cooling requirements limit the practical range to approximately 5:1 to 6:1 for simple cycle units.
The pressure ratio is defined as the ratio of compressor discharge pressure to compressor inlet (ambient) pressure.
Higher pressure ratios increase the peak cycle temperature for a fixed combustion heat input.
Modern high-efficiency plants (combined cycle) often use significantly higher pressure ratios (up to 30:1 or more) with intercooling and complex blade cooling.
The 5 to 6 range is specifically characteristic of simple-cycle industrial gas turbines operating under standard atmospheric conditions.
Improved thermal efficiency with optimized pressure ratios
Compact power plant design compared to steam cycles
Limitation on pressure ratio due to material thermal fatigue
High sensitivity to ambient temperature and inlet air quality
Peak load power generation
Aviation propulsion systems
Combined Cycle Gas Turbine (CCGT) power plants
While 5 to 6 is the standard range for simple cycles taught in basic courses, current state-of-the-art aero-derivative turbines exceed this value significantly.
Option B (9 to 12) is commonly seen in more advanced configurations but is not the standard convention for elementary gas turbine questions.
A is correct тАФ The standard operating pressure ratio for simple-cycle gas turbine power plants is typically maintained between 5 and 6.
Always relate the pressure ratio to the specific cycle type; if the question specifies 'Combined Cycle', the expected pressure ratio value will be significantly higher than in a 'Simple Cycle' plant.