Join 60,000+ competitive exam aspirants
The insulating material used for cables should have all of the following except
High dielectric strength, high mechanical strength, high resistivity and high viscosity at impregnation temperature
Low thermal coefficient, low permittivity, acid proof, non-inflammable and non-hygroscopic
High water absorption
Capability of withstanding high rupturing voltages
High water absorption
Insulating materials for underground cables must have high dielectric strength and low permittivity to minimize leakage current and dielectric losses. High water absorption is a detrimental property because moisture ingress significantly lowers the insulation resistance and dielectric strength, leading to potential cable failure.
Insulating materials for underground cables must have high dielectric strength and low permittivity to minimize leakage current and dielectric losses. High water absorption is a detrimental property because moisture ingress significantly lowers the insulation resistance and dielectric strength, leading to potential cable failure.
RinsтАЛ=2╧АL╧БтАЛln(rRтАЛ) тАФ Insulation resistance formula where ╧Б is resistivity
tan╬┤=╧ЙCR1тАЛ тАФ Dissipation factor representing dielectric loss
Insulation in cables acts as a dielectric barrier between the conductor and the sheath (or ground). Materials like paper, XLPE, or PVC are chosen because they exhibit high resistivity and resistance to environmental moisture. If a material absorbs water, the dipole molecules of water reduce the dielectric constant and increase dissipation factor (tan ╬┤),ultimately leading to electrical breakdown under high voltage stress.
Dielectric strength must be high to withstand high operating voltage.
Material should be non-hygroscopic to prevent moisture absorption.
Thermal stability is required to withstand heat generated by current carrying capacity.
Low permittivity is desired to minimize the charging current (IcтАЛ=V╧ЙC).
High resistivity prevents leakage current
High dielectric strength reduces insulation thickness
High water absorption leads to short circuits
High permittivity increases cable capacitance
Cross-Linked Polyethylene (XLPE) for EHV cables
Impregnated paper for oil-filled cables
The term 'non-hygroscopic' is a technical requirement for all cable insulators to ensure long-term reliability in underground environments.
Option C is the correct answer because 'High water absorption' is a defect, not a desirable property.
C is correct тАФ High water absorption is undesirable for insulating materials as it degrades dielectric properties and leads to premature cable failure.
Remember that in power systems, moisture is the enemy of insulation. Always associate 'non-hygroscopic' with high-quality cable dielectric materials.