Join 60,000+ competitive exam aspirants
The interconnected system has following power plants
Nuclear
Steam
Diesel
Gas turbine
Hydro with storage
Run off the river
Pumped storage
Which of the above three power plants are used exclusively for supplying peak loads?
1, 2, 3
3, 4, 7
4, 5, 6
2, 3, 5
3, 4, 7
Peak load plants are designed for quick start-up and short-duration operation to meet fluctuating high-demand periods. Diesel, Gas turbine, and Pumped storage plants are ideal for this due to their rapid start-up characteristics and flexibility in operation.
Peak load plants are designed for quick start-up and short-duration operation to meet fluctuating high-demand periods. Diesel, Gas turbine, and Pumped storage plants are ideal for this due to their rapid start-up characteristics and flexibility in operation.
Capacity┬аFactor=MaxPossibleEnergyinPeriodActualEnergyProducedтАЛ
Load┬аFactor=Maximum┬аDemandAverage┬аDemandтАЛ
Peak load plants generally have lower capital costs but higher operating costs compared to base load plants like Nuclear or Steam. Diesel and Gas turbines can be synchronized to the grid in minutes, whereas Hydro with storage or Pumped storage systems provide quick response by utilizing stored potential energy.
Peak load plants operate only for a small fraction of the total hours in a year.
Nuclear and Steam plants are 'Base Load' plants due to slow start-up and high thermal inertia.
Run-of-river plants are 'Base Load' or 'Must-run' plants as they depend on natural water flow.
Diesel and Gas turbines have very short response times, making them suitable for peaking and emergency standby.
Rapid synchronization with the grid
High operational flexibility
Lower initial capital investment
High cost per unit of energy generated (Fuel cost)
Not suitable for continuous heavy base load operation
Grid stability during sudden demand spikes
Emergency standby and frequency regulation
Base load plants: Nuclear, Large Coal (Steam), Run-of-river Hydro.
Peak load plants: Diesel, Gas turbine, Pumped storage, Hydro with large reservoir (if managed for peaking).
B is correct тАФ Diesel, Gas turbine, and Pumped storage plants are explicitly categorized as peak load plants due to their rapid start-up and quick load-following capabilities.
Remember the 3S rule for Peaking Plants: Small, Swift, and Stored energy (Diesel/Gas are small/swift, Pumped storage is stored energy).