Join 60,000+ competitive exam aspirants
The length of the phasor represents?
Magnitude of the quantity
Direction of the quantity
Neither magnitude nor direction
Either magnitude or direction
Magnitude of the quantity
A phasor is a rotating vector representation of a sinusoidal time-varying quantity. The length (magnitude) of the phasor is equal to the peak amplitude of the sinusoidal signal, while its angular position relative to the reference axis represents the phase angle at a specific instant.
A phasor is a rotating vector representation of a sinusoidal time-varying quantity. The length (magnitude) of the phasor is equal to the peak amplitude of the sinusoidal signal, while its angular position relative to the reference axis represents the phase angle at a specific instant.
X=Aej╧Х тАФ Phasor representation in polar form
тИгXтИг=A тАФ Magnitude of the quantity represented by phasor length
In AC circuit analysis, a sinusoid x(t)=Acos(╧Йt+╧Х) is represented as a complex number or vector X=Aej╧Х. The magnitude of this complex number, denoted as тИгXтИг=A, is plotted as the length of the vector originating from the origin. The angle ╧Х with the horizontal reference axis indicates the phase shift.
The length corresponds to the maximum (peak) value of the AC quantity.
The angle with the horizontal axis represents the phase angle at time t=0.
Phasors are primarily used for steady-state analysis of linear time-invariant circuits.
Phasors rotate counter-clockwise at an angular velocity of ╧Й rad/s.
Simplifies differential equations to algebraic equations
Provides a clear visual representation of phase relationships
Limited to linear circuits under sinusoidal excitation
Does not represent transients effectively
Steady-state AC circuit analysis
Power systems load flow studies
Some conventions use the RMS value instead of the peak value for the phasor length; this must be consistent throughout the analysis.
Option B is incorrect because the direction (angle) represents the phase, not the quantity itself.
Phasors allow the use of complex algebra to solve complex RLC circuit problems easily.
A is correct тАФ The length of a phasor corresponds to the peak magnitude of the sinusoidal quantity being represented.
Always verify if your textbook or exam board uses peak or RMS magnitude for phasors, as this is a common point of confusion in power system calculations.