Join 60,000+ competitive exam aspirants
The major function of the condenser is to
Remove the condensate for boiler feed water
Condense steam
Reduce the back pressure so that maximum heat energy can be extracted from steam
Provide a closed cycle
Reduce the back pressure so that maximum heat energy can be extracted from steam
The primary function of a condenser in a steam power plant is to condense the exhaust steam from the turbine back into liquid water. By doing so, it creates a high vacuum at the turbine exhaust, which significantly increases the pressure drop across the turbine and enhances the thermodynamic efficiency of the cycle.
The primary function of a condenser in a steam power plant is to condense the exhaust steam from the turbine back into liquid water. By doing so, it creates a high vacuum at the turbine exhaust, which significantly increases the pressure drop across the turbine and enhances the thermodynamic efficiency of the cycle.
WturbineтАЛ=m╦Щ(hinтАЛтИТhoutтАЛ) тАФ Work extracted from steam based on enthalpy drop
╬╖thermalтАЛ=QinтАЛWnetтАЛтАЛ тАФ Overall plant thermal efficiency depends on sink temperature
The condenser operates by rejecting latent heat from the exhaust steam to a cooling medium (like water from a cooling tower or river). As steam condenses, its specific volume decreases drastically (by a factor of nearly 20,000). This rapid contraction creates a low-pressure zone (vacuum) at the turbine exit, allowing the steam to expand further and extract more work per unit mass.
Condensation creates a vacuum, allowing lower turbine exhaust pressure.
Higher pressure drop (DeltaP) across the turbine leads to higher work extraction.
The condenser serves as the heat sink for the Rankine cycle.
Recovered condensate is pure water, ideal for boiler feed, reducing water treatment costs.
Increased plant thermal efficiency
Recovery of high-quality boiler feed water
Reduction in turbine exit pressure
Requires significant cooling water infrastructure
Susceptible to vacuum leaks and air ingress
Maintenance of heat exchanger tubes is required
Steam Power Plants (Thermal)
Nuclear Power Stations
Marine Propulsion Systems
The vacuum pressure in a condenser is typically maintained between 0.05 to 0.1 bar.
Option B is technically true but incomplete; condensing is the mechanism, whereas the reduction of back pressure is the primary engineering objective for efficiency.
Option A is a benefit (regeneration of feed water) but not the primary functional purpose of the device.
C is correct тАФ The condenser reduces back pressure at the turbine exhaust, which facilitates greater expansion of steam and maximizes the total work output of the turbine.
In steam power cycles, always associate 'condenser' with 'vacuum' and 'increased enthalpy drop' to maximize turbine work according to the First Law of Thermodynamics.