Join 60,000+ competitive exam aspirants
In which part of the thermal power plant, the steam pressure is less than that of atmosphere
Boiler
Turbine
Super heater
Condenser
Condenser
In a steam power plant, the condenser operates at a sub-atmospheric pressure, known as a vacuum, to maximize the pressure drop across the turbine. This increase in the expansion range allows for greater extraction of work from the steam according to the Rankine cycle principles.
In a steam power plant, the condenser operates at a sub-atmospheric pressure, known as a vacuum, to maximize the pressure drop across the turbine. This increase in the expansion range allows for greater extraction of work from the steam according to the Rankine cycle principles.
W=m╦Щ(h1тАЛтИТh2тАЛ) тАФ where W is the turbine work output and h2тАЛ is lower due to condenser vacuum
PcondтАЛ<PatmтАЛ тАФ the condition for vacuum pressure
The condenser uses a cooling medium (water) to rapidly condense exhaust steam into liquid water, significantly reducing its specific volume. Because the volume of liquid is negligible compared to the steam, a partial vacuum is created within the condenser shell. This low-pressure environment effectively 'pulls' the steam through the turbine blades, increasing the overall plant efficiency by maximizing the enthalpy drop (hinletтАЛтИТhexhaustтАЛ).
Condensers typically operate at pressures around 0.05 to 0.1 bar.
A higher vacuum leads to higher thermal efficiency of the plant.
The condenser pressure is determined by the cooling water temperature.
Air leakage into the condenser can spoil the vacuum, requiring air extraction pumps.
Increases the total work output of the turbine
Allows for the recycling of high-quality feedwater back to the boiler
Requires complex cooling water systems (cooling towers or natural bodies of water)
Susceptible to air ingress which degrades performance
Thermal Power Plants (Coal/Nuclear)
Geothermal Power Plants
Boilers operate at high pressure (often super-critical) to enhance thermal efficiency.
The turbine operates from high pressure at the inlet to low pressure at the exhaust.
Superheaters are designed to increase the temperature of steam at constant pressure to prevent moisture formation in turbine stages.
D is correct тАФ The condenser is the only component in the cycle maintained at a vacuum pressure (less than atmospheric) to expand the steam's total enthalpy drop.
Always remember that in the Rankine cycle, the condenser pressure is the lowest pressure point, while the boiler provides the highest pressure.