Join 60,000+ competitive exam aspirants
The markings on the kerbs are painted with which colour to increase user visibility?
Black Only
Alternate white and yellow
Alternate black and white
Yellow Only
Alternate black and white
Kerbs are marked with alternating black and white stripes to enhance their visibility, especially during nighttime or low-light conditions. This high-contrast pattern allows drivers to clearly delineate the edge of the carriageway, preventing accidental mounting or collision.
IRC: 35-2015 (Code of Practice for Road Markings)
Kerbs are marked with alternating black and white stripes to enhance their visibility, especially during nighttime or low-light conditions. This high-contrast pattern allows drivers to clearly delineate the edge of the carriageway, preventing accidental mounting or collision.
C=LwтАЛ+LbтАЛLwтАЛтИТLbтАЛтАЛ тАФ Michelson contrast where LwтАЛ and LbтАЛ are the luminance of white and black surfaces respectively
The principle relies on high-contrast visual perception. The alternating pattern creates a 'flicker' effect or boundary definition that is easily discernible by the human eye compared to a monochromatic surface. White reflects incident light (such as headlight beams), while black absorbs it, creating maximum luminance contrast.
Kerb markings are typically placed at junctions, hazard points, and pedestrian crossings.
The standard length of stripes is generally equal for both black and white colors, usually 30 cm to 60 cm depending on site requirements.
Reflective materials or beads are often incorporated into the paint to improve retro-reflectivity.
Proper marking reduces the risk of vehicles encroaching onto footpaths or hitting obstacles.
Enhanced visibility at night
Clear demarcation of road boundaries
Improved driver spatial awareness
Requires regular maintenance due to tire scuffs and environmental weathering
Higher initial cost than single-color painting
Parking curb edges
Traffic island perimeters
Road medians and side kerbs at sharp bends
IRC: 35 specifies that for visibility, the contrast between the marking and the road surface is critical.
Option B (Alternate white and yellow) is usually reserved for specific parking regulations or specific hazard warnings, not general kerb demarcation.
C is correct тАФ Alternate black and white markings are the standard practice for kerb delineation to ensure maximum visual contrast.
Always remember that yellow markings are typically used for regulatory 'No Parking' or 'Waiting restrictions', while black and white is for physical object delineation.