Join 60,000+ competitive exam aspirants
The most economical limit of power factor correction┬а is governed by
Original power factor
Relative cost of supply and power factor correction equipment
Both (a) and (b)
Neither (a) or (b)
Relative cost of supply and power factor correction equipment
The most economical power factor correction is determined by the Kelvin's law principle, which states that the total cost (cost of supply + cost of compensation equipment) must be minimized. Increasing the power factor reduces line losses and improves voltage regulation, but beyond a certain point, the cost of adding capacitors outweighs the financial savings from the reduced losses.
The most economical power factor correction is determined by the Kelvin's law principle, which states that the total cost (cost of supply + cost of compensation equipment) must be minimized. Increasing the power factor reduces line losses and improves voltage regulation, but beyond a certain point, the cost of adding capacitors outweighs the financial savings from the reduced losses.
CtotalтАЛ=CfixedтАЛ+ClossтАЛ тАФ Represents the sum of annualized equipment cost and energy loss cost
ClossтАЛтИЭcos2╧Х1тАЛ тАФ Shows the inverse relationship between power factor and transmission losses
The total annual cost is a sum of the fixed cost of the equipment and the variable cost of energy losses. As the power factor increases toward unity, the capital investment in capacitors increases while the cost of energy loss decreases. The optimal point occurs where the rate of decrease in loss costs exactly matches the rate of increase in capital investment costs for the correction equipment.
Most utility companies set a penalty threshold (e.g., 0.85 or 0.90) for power factor.
Correcting beyond unity (leading power factor) may lead to over-voltage conditions.
The economic limit is usually slightly less than unity due to the diminishing returns of capacitor investment.
Reduced electricity bills due to penalty avoidance
Increased capacity of existing distribution system
Capital expenditure for capacitor banks
Potential for resonance if harmonics are present in the system
Industrial plants with large induction motor loads
Utility substations for voltage stability
Option A is incorrect because while original PF dictates the required VARs, it does not dictate the economic threshold.
Option B is the correct answer because it balances the expense of hardware against the fiscal savings of system efficiency.
B is correct тАФ The most economical limit is dictated by the point where the cost of additional power factor correction equipment equals the savings generated by reduced line losses.
Always remember that perfect unity power factor (cos╧Х=1) is technically possible but rarely the most 'economical' target in real-world power systems.