Join 60,000+ competitive exam aspirants
The pressure at the furnace is minimum in case of
Induced draught
Forced draught
Balanced draught
Natural draught
Balanced draught
In a balanced draught system, both forced draught (FD) and induced draught (ID) fans are used, ensuring that the furnace pressure is maintained slightly below atmospheric pressure. This specific pressure control prevents the leakage of smoke or hot gases into the boiler room while maintaining efficient combustion conditions.
In a balanced draught system, both forced draught (FD) and induced draught (ID) fans are used, ensuring that the furnace pressure is maintained slightly below atmospheric pressure. This specific pressure control prevents the leakage of smoke or hot gases into the boiler room while maintaining efficient combustion conditions.
PfurnaceтАЛ<PatmтАЛ тАФ represents the negative pressure condition in the furnace
PnetтАЛ=PforcedтАЛтИТPinducedтАЛ тАФ represents the net pressure control mechanism
The balanced draught system functions by using a forced draught fan at the boiler inlet to push air into the furnace and an induced draught fan at the chimney base to extract flue gases. By regulating the speeds of these two fans, the pressure inside the combustion chamber is kept at a value marginally lower than the ambient atmospheric pressure. This suction effect (negative pressure) is safer for operating personnel and improves boiler efficiency.
Balanced draught effectively combines the benefits of both forced and induced systems.
It prevents the escape of noxious gases into the boiler house due to negative furnace pressure.
The ID fan handles the flue gases, while the FD fan overcomes the resistance of the fuel bed.
It allows for better control over the air-fuel ratio, leading to higher furnace efficiency.
Prevents gas leakage into the boiler room
Increases overall combustion efficiency
Independent control over combustion and gas removal
High initial capital investment
Complex control system required for balancing fan speeds
High capacity modern steam power plants
Large industrial boilers
In natural draught, the pressure is always negative but depends entirely on the chimney height and ambient temperature.
In forced draught, the pressure in the furnace is usually positive, which can lead to gas leakage through furnace doors.
In induced draught, the furnace operates under negative pressure, but it lacks the air-pushing capacity for large, high-resistance beds.
C is correct тАФ Balanced draught maintains the furnace at a pressure slightly below atmospheric to ensure safety and efficient combustion.
Always remember that 'Balanced' implies the optimization of both pressure (keeping it slightly negative) and flow, which is critical for large boiler installations in power systems.