Join 60,000+ competitive exam aspirants
The draught produced in locomotive boilers is by
Forced fan
Steam jet
Chimney
Motion of locomotive
Steam jet
In locomotive boilers, the draught is produced by an induced draught system created by a steam jet known as the 'blast pipe'. This system utilizes the exhaust steam from the engine to create a partial vacuum in the smoke box, which draws combustion gases through the boiler tubes.
In locomotive boilers, the draught is produced by an induced draught system created by a steam jet known as the 'blast pipe'. This system utilizes the exhaust steam from the engine to create a partial vacuum in the smoke box, which draws combustion gases through the boiler tubes.
PdтАЛ=21тАЛ╧Бv2 тАФ representing the pressure difference created by velocity
QтИЭm╦ЩsteamтАЛ тАФ draught volume flow is proportional to steam mass flow rate
The exhaust steam from the cylinders is directed through a nozzle called the blast pipe, located at the base of the chimney in the smoke box. As the steam exits at high velocity, it entrains the surrounding flue gases, creating a low-pressure zone (vacuum) that induces air flow through the firebox and tubes. The intensity of the draught is automatically proportional to the speed of the engine, as higher steam consumption leads to more rapid exhaustion.
The blast pipe is a critical component of the steam locomotive boiler.
It provides a self-regulating draught mechanism; as demand on the boiler increases, engine speed rises, leading to stronger suction.
The chimney acts only as a passage for exit gases and does not provide sufficient natural draught for locomotives.
Self-regulating based on steam demand
Compact and lightweight for mobile applications
No external power required for the fan
Efficiency is linked strictly to engine load
High backpressure can occur if the nozzle is incorrectly sized
No draught when the locomotive is stationary (requires a blower)
Steam locomotives
Historical steam traction engines
Natural draught (chimney) is insufficient for locomotives because the chimney height is limited by the structure gauge.
A 'blower' is used while the locomotive is standing still to maintain draught by bypass steam from the boiler directly to the blast pipe.
B is correct тАФ The steam jet from the exhaust pipe creates a partial vacuum in the smoke box, inducing combustion air flow through the boiler tubes.
In steam power plant exams, always distinguish between 'natural draught' (chimney height) and 'artificial draught' (fan or jet); locomotives specifically require artificial draught due to limited space.