Join 60,000+ competitive exam aspirants
The primary reason for low power factor is owing to installation of
Synchronous motor
DC motor
Induction motor
Commutator motor
Induction motor
The primary reason for a low power factor in industrial and commercial distribution systems is the widespread use of induction motors. Induction motors operate on the principle of electromagnetic induction and require magnetizing current (reactive power) to establish the necessary rotating magnetic field, leading to a lagging power factor.
The primary reason for a low power factor in industrial and commercial distribution systems is the widespread use of induction motors. Induction motors operate on the principle of electromagnetic induction and require magnetizing current (reactive power) to establish the necessary rotating magnetic field, leading to a lagging power factor.
P=VIcos╧Х тАФ Represents Real Power in Watts
Q=VIsin╧Х тАФ Represents Reactive Power in VARs
cos╧Х=P2+Q2тАЛPтАЛ тАФ Power Factor calculation
Induction motors require reactive power (Q) to excite their stator windings and create a magnetic flux. Because this reactive component is drawn from the supply along with the real power (P), the total apparent power (S) increases. Since power factor is defined as cos╧Х=SPтАЛ, a higher demand for reactive power relative to real power causes the phase angle ╧Х to increase, thereby reducing cos╧Х.
Induction motors are essentially 'lagging' loads because they absorb reactive power.
A low power factor increases current flow for the same power output, leading to higher I2R losses.
Power factor can be improved by installing static capacitors in parallel with the inductive load.
The magnetizing current in induction motors is largely independent of load but increases significantly at light loads.
High starting torque
Robust construction
Self-starting capability
Draws lagging reactive power
Poor power factor at light loads
Requires high starting current
Industrial pumps
Fans and blowers
Conveyor belts
Synchronous motors (Option A) can operate at leading power factors when over-excited and are used for power factor correction, not as the cause of low power factor.
DC motors (Option B) have a unity power factor because they do not require reactive power for flux linkage in the same manner as AC motors.
Standard power factor correction usually involves using capacitor banks to supply the necessary reactive power locally.
C is correct тАФ The induction motor is the primary cause of low power factor because it consumes reactive power to maintain its magnetic field, resulting in a lagging current.
Always remember that inductive loads (motors, transformers) cause lagging power factor, whereas capacitors provide leading reactive power to neutralize it.