Join 60,000+ competitive exam aspirants
Low power factor is usually not due to
Discharge lamps
Incandescent lamps
Arc lamps
Induction furnaces
Incandescent lamps
Low power factor in electrical systems is primarily caused by inductive loads that require reactive power to maintain magnetic fields. An incandescent lamp is a purely resistive load, meaning it consumes active power only and operates at unity power factor (cos╧Х=1).
Low power factor in electrical systems is primarily caused by inductive loads that require reactive power to maintain magnetic fields. An incandescent lamp is a purely resistive load, meaning it consumes active power only and operates at unity power factor (cos╧Х=1).
PF=cos╧Х=SPтАЛ тАФ Ratio of Real Power to Apparent Power
S=P2+Q2тАЛ тАФ Relationship between Apparent, Real, and Reactive Power
In resistive loads like incandescent lamps, voltage and current are in phase, resulting in zero reactive power demand. Conversely, discharge lamps (chokes), arc lamps, and induction furnaces possess significant inductive components (magnetic ballasts or electromagnetic induction coils), which cause the current to lag behind the voltage, lowering the power factor.
Incandescent lamps act as unity power factor loads.
Inductive components (ballasts, coils) in other loads create lagging reactive power.
Power factor is defined as the cosine of the phase angle between voltage and current.
Low power factor increases I2R losses in the transmission and distribution network.
High power factor reduces current for a given load, reducing line losses.
Improves voltage regulation of the system.
Low PF forces utilities to install capacitor banks for compensation.
Increased size of generators and transformers required for the same active load.
Lighting systems
Industrial induction heating
Power distribution networks
| Feature | Incandescent Lamp | Induction Furnace |
|---|---|---|
Nature of Load | Resistive | Inductive |
Most domestic and industrial loads are inductive (motors, transformers, discharge lamps).
Discharge lamps require ballasts which are inductive, leading to PF values typically between 0.5 and 0.8 lagging.
B is correct тАФ Incandescent lamps are purely resistive loads and operate at unity power factor, thus they do not contribute to low power factor.
Always remember: Any load involving a magnetic field (motors, transformers, ballasts) is inductive and will lead to a lagging power factor, while heating elements and incandescent filaments are resistive (unity PF).