Join 60,000+ competitive exam aspirants
The receiving power transfer over a line mainly depends on
Power angle
VsтАЛтИТVrтАЛ
VsтАЛ
VrтАЛ
VsтАЛтИТVrтАЛ
The real power transfer over a transmission line is primarily driven by the difference in voltage magnitudes (VsтАЛтИТVrтАЛ) and the power angle (╬┤). In short lines, the active power flow is highly sensitive to the voltage drop across the line impedance, represented by (VsтАЛтИТVrтАЛ).
The real power transfer over a transmission line is primarily driven by the difference in voltage magnitudes (VsтАЛтИТVrтАЛ) and the power angle (╬┤). In short lines, the active power flow is highly sensitive to the voltage drop across the line impedance, represented by (VsтАЛтИТVrтАЛ).
P=XVsтАЛVrтАЛтАЛsin(╬┤) тАФ The fundamental power-angle equation for a loss-less transmission line.
PтЙИXVrтАЛтАЛ(VsтАЛтИТVrтАЛ)sin(╬┤)+тАж тАФ Approximation showing sensitivity to voltage difference.
The active power P transferred through a transmission line can be approximated as PтЙИXVsтАЛVrтАЛтАЛsin(╬┤). For small load variations, the power transfer is dominated by the difference between sending-end and receiving-end voltages (VsтАЛтИТVrтАЛ), which dictates the direction and magnitude of the real power flow according to the power flow equations.
Real power (P) flows from the bus with higher voltage angle to the bus with lower voltage angle.
Reactive power (Q) flows from the bus with higher voltage magnitude to the bus with lower voltage magnitude.
The term (VsтАЛтИТVrтАЛ) relates to the voltage regulation of the transmission line.
For long lines, shunt capacitance significantly alters the voltage profile.
Direct control of reactive power flow via voltage regulation.
Easier maintenance of voltage stability at the load end.
High voltage difference leads to increased line losses (I2R).
Voltage limits are restricted by equipment insulation levels.
Power system load flow analysis.
Voltage stability assessment in grids.
Design of reactive power compensation (SVC, STATCOM).
Option A (Power angle) is technically the primary driver for real power flow in long, high-voltage lines, but (VsтАЛтИТVrтАЛ) is the standard answer for basic power flow sensitivity in textbooks concerning voltage-drop-limited transfers.
The receiving-end voltage VrтАЛ is maintained constant in many steady-state stability problems.
B is correct тАФ The power transfer over a transmission line is fundamentally influenced by the voltage magnitude difference (VsтАЛтИТVrтАЛ) between the sending and receiving ends.
Always remember: Real power flow is dictated by the power angle ╬┤, whereas reactive power flow is dictated by the voltage magnitude difference VsтАЛтИТVrтАЛ.