Join 60,000+ competitive exam aspirants
The selection of the type and size of a steam boiler depends upon
The power required and working pressure
The geographical position of the power house
The fuel and water availability
All of above
The power required and working pressure
The selection of a steam boiler is primarily governed by its technical capacity to meet the plant's thermal demand and its ability to withstand the internal steam pressure generated. These two factors dictate the boiler's design, material thickness, and heating surface area.
The selection of a steam boiler is primarily governed by its technical capacity to meet the plant's thermal demand and its ability to withstand the internal steam pressure generated. These two factors dictate the boiler's design, material thickness, and heating surface area.
Q=m╦Щ├Ч(hsteamтАЛтИТhwaterтАЛ) тАФ Rate of heat transfer required in a boiler
P=1F├ЧAтАЛ тАФ Simplified relation between pressure, force, and surface area
Steam boilers are engineered to transform thermal energy from fuel combustion into high-pressure steam. The boiler type (fire-tube vs. water-tube) and size (evaporative capacity) are calculated based on the Massflowrateofsteam required to drive the prime mover (e.g., turbine) and the OperatingPressure required for the thermal cycle efficiency.
Boiler capacity is measured in 'Equivalent Evaporation' (kg/hr).
High-pressure applications necessitate water-tube boilers due to structural integrity.
Low-pressure or small-capacity requirements are typically met by fire-tube (package) boilers.
Fuel and water availability influence operating costs rather than the fundamental engineering sizing of the boiler vessel itself.
Optimizes capital expenditure by matching boiler size to plant demand.
Ensures safety by selecting correct wall thickness for specific pressures.
Oversizing leads to inefficient part-load operation and high standby losses.
Undersizing causes pressure drops during peak load periods.
Thermal Power Plants
Process Industry (Chemical/Food Processing)
District Heating Systems
Option B and C relate to site selection or economic factors, whereas the fundamental physical design parameters of the hardware are dictated by load and pressure.
Working pressure classification: Low (< 10 bar), Medium (10тБ╗┬▓тБ╡ bar), High (> 25 bar).
A is correct тАФ The power requirement (steam demand) and working pressure are the fundamental thermodynamic parameters that determine the physical design, metallurgy, and size of a steam boiler.
In thermal power plant questions, always prioritize parameters that affect the 'Thermodynamic Cycle' (P, T, mass flow) over peripheral economic or site-specific factors.