Join 60,000+ competitive exam aspirants
In a super heater
Pressure rises and temperature drops
Temperature rises and pressure drops
Temperature rises and pressure remains unchanged
Pressure rises and temperature remains the same
Temperature rises and pressure remains unchanged
A superheater is a component in a steam power plant designed to increase the temperature of steam beyond its saturation temperature without changing its pressure. By converting 'wet' or 'saturated' steam into 'superheated' steam, it significantly improves the thermal efficiency of the steam cycle and prevents condensation in the turbine blades.
A superheater is a component in a steam power plant designed to increase the temperature of steam beyond its saturation temperature without changing its pressure. By converting 'wet' or 'saturated' steam into 'superheated' steam, it significantly improves the thermal efficiency of the steam cycle and prevents condensation in the turbine blades.
Q=mтЛЕCpтАЛтЛЕ(TsupтАЛтИТTsatтАЛ) тАФ Heat added in the superheater
╬╖thermalтАЛ=1тИТTsourceтАЛTsinkтАЛтАЛ тАФ Carnot efficiency principle applied to increased TsourceтАЛ
The process occurs at constant pressure (isobaric) within the boiler circuit. As the saturated steam flows through the tubes of the superheater, it absorbs heat from the flue gases. Because the steam is not in contact with the water surface during this stage, the absorbed thermal energy serves only to increase the kinetic energy of the steam molecules, thereby raising the temperature without increasing the pressure.
Superheating prevents erosion of turbine blades by avoiding moisture condensation.
The process takes place at constant pressure within the Rankine cycle.
Higher steam temperature improves the overall plant cycle efficiency.
Superheaters are typically located in the path of hot flue gases after the boiler furnace.
Increases overall thermal efficiency of the power plant
Prevents blade erosion in steam turbines by keeping steam dry
Requires high-grade alloys to withstand high temperatures
Increased material costs and maintenance complexity
Thermal power plants
Combined cycle power plants (HRSG units)
The process is technically an isobaric heat addition where the steam state moves away from the saturation line on the T-s diagram.
Option B (Pressure drop) occurs in nozzles or valves due to friction and flow resistance, which is undesirable in a superheater.
C is correct тАФ In a superheater, the steam temperature increases significantly while the pressure remains essentially constant, assuming negligible frictional losses.
Always remember that in steam cycle components like boilers and superheaters, heat addition is treated as an isobaric (constant pressure) process in ideal thermodynamic analysis.