Join 60,000+ competitive exam aspirants
Within the boiler, the steam has highest temperature in
Super heater
Water tubes
Water walls
Water drum
Super heater
The superheater is a component of the steam generator that increases the temperature of saturated steam beyond its saturation point without further increasing the pressure. By adding additional heat to the steam after it has left the boiler drum, it ensures the steam remains dry and reaches the highest temperature in the cycle before entering the turbine.
The superheater is a component of the steam generator that increases the temperature of saturated steam beyond its saturation point without further increasing the pressure. By adding additional heat to the steam after it has left the boiler drum, it ensures the steam remains dry and reaches the highest temperature in the cycle before entering the turbine.
Q=mтЛЕCpтАЛтЛЕ(TsuperтАЛтИТTsatтАЛ) тАФ Heat absorbed by steam in the superheater
╬╖thermalтАЛ=1тИТTsourceтАЛTsinkтАЛтАЛ тАФ Carnot efficiency indicating why higher TsourceтАЛ (superheat) is beneficial
In a steam power plant, saturated steam from the boiler drum is passed through tubes located in the path of hot flue gases. Since the temperature of these flue gases is much higher than the saturation temperature of steam at the given pressure, heat is transferred to the steam, converting it into 'superheated' steam. This process increases the thermal efficiency of the Rankine cycle and prevents moisture condensation in the lower stages of the turbine.
Superheating increases the specific enthalpy of steam.
It prevents erosion of turbine blades by avoiding moisture formation.
The process takes place at constant pressure (Isobaric).
It is the final stage of heat addition in the boiler circuit.
Increases overall plant thermal efficiency.
Reduces the risk of moisture-induced damage in turbine blades.
Requires high-grade heat-resistant alloys for tubing.
Increases complexity and cost of the boiler system.
Thermal power plants
High-pressure industrial steam processes
Water drum and water tubes contain saturated water and wet steam, which are at the saturation temperature for a given pressure.
Superheater temperature can reach up to 550┬░C to 600┬░C in modern supercritical plants.
A is correct тАФ The superheater is designed specifically to add heat to saturated steam to raise its temperature above the saturation point.
Always remember that in the T-s diagram of a Rankine cycle, the superheat region is to the right of the saturation vapor line, confirming it represents the highest temperature state.