Join 60,000+ competitive exam aspirants
The size of conductor used in power cables depends on
Operating voltage
Power factor
Current to be carried
Type of insulation used
Current to be carried
The primary factor determining the cross-sectional area of a power cable conductor is the current it is intended to carry. A larger current requires a greater cross-sectional area to minimize I2R losses, prevent excessive temperature rise, and ensure the conductor operates within its thermal limit.
The primary factor determining the cross-sectional area of a power cable conductor is the current it is intended to carry. A larger current requires a greater cross-sectional area to minimize I2R losses, prevent excessive temperature rise, and ensure the conductor operates within its thermal limit.
R=╧БALтАЛ тАФ Resistance of the conductor
PlossтАЛ=I2R тАФ Power loss in the conductor
The current-carrying capacity, or ampacity, is governed by the heat dissipation capability of the cable. As current flows through the conductor, power is dissipated as heat due to the resistance R=╧БALтАЛ. By increasing the cross-sectional area A, the resistance decreases, thereby reducing the heat generation and preventing the degradation of the cable's insulation.
Ampacity is the maximum current a cable can carry continuously without exceeding its temperature rating.
Voltage drop and short-circuit rating are also considered for long-term reliability, but initial sizing is based on current.
Material properties like resistivity (╧Б) influence the choice of conductor size for a given current load.
Lower resistance reduces energy wastage.
Higher thermal stability under full load.
Increased conductor size leads to higher cable costs.
Larger diameter increases cable weight and installation difficulty.
Underground distribution systems.
Industrial power transmission.
Submarine power cabling.
Operating voltage determines the insulation thickness, not the conductor size.
Power factor affects total apparent power (kVA) but current is the direct variable for conductor sizing.
Type of insulation determines the maximum permissible operating temperature, which in turn limits the ampacity.
C is correct тАФ The conductor cross-sectional area must be sufficient to carry the required current without exceeding thermal and voltage drop limits.
While current determines conductor size, remember that 'Operating Voltage' is the primary factor determining the 'Insulation thickness' and 'Dielectric strength' required for the cable.