Join 60,000+ competitive exam aspirants
The size of inter poles is small as compared to main poles. What is the reason?
In order to not to get saturated
In order to get saturated
In order to get more flux
All of the above
In order to not to get saturated
Interpoles are designed to be smaller than main poles to ensure they remain unsaturated even at high load currents. Their primary function is to neutralize the armature reaction flux in the commutating zone, which requires the interpole flux to be strictly proportional to the armature current.
Interpoles are designed to be smaller than main poles to ensure they remain unsaturated even at high load currents. Their primary function is to neutralize the armature reaction flux in the commutating zone, which requires the interpole flux to be strictly proportional to the armature current.
╬жiтАЛтИЭIaтАЛ тАФ Interpole flux must be directly proportional to armature current
ecтАЛ=LdtdiтАЛ тАФ Induced EMF in commutating coil which interpoles must neutralize
The magnetic circuit of the interpole is kept unsaturated so that the interpole flux remains directly proportional to the armature current (IaтАЛ). If the interpole were to saturate, the flux would not increase linearly with IaтАЛ, failing to perfectly cancel the cross-magnetizing effect and the L di/dt induced EMF, which would lead to sparking at the brushes.
Interpoles are connected in series with the armature winding.
The air gap of an interpole is typically larger than that of the main pole to prevent saturation.
They help in achieving sparkless commutation by providing a counter-EMF.
They do not affect the main field flux significantly.
Eliminates sparking at the commutator brushes
Allows operation at higher speeds with better load regulation
Adds complexity and cost to the machine design
Requires precise mechanical alignment
High-capacity DC generators
DC motors used in traction and variable speed drives
If interpoles were to saturate, the linear relationship between current and compensating flux is lost, leading to poor commutation.
Option B is incorrect because saturation would lead to non-linear flux response and severe brush sparking under load conditions.
A is correct тАФ The small physical size and large air gap of interpoles ensure their magnetic circuit remains unsaturated, maintaining a linear relationship between armature current and compensating flux.
Always remember that components designed to neutralize armature reaction, such as interpoles and compensating windings, must maintain linear magnetic behavior to perform their role effectively across the full operating range of the machine.