Join 60,000+ competitive exam aspirants
The specific speed of a water turbine is the speed at which the turbine develops
Maximum horse power
Unit horse power at all heads
Unit horse power at unit head
Minimum horse power
Unit horse power at unit head
The specific speed (NsтАЛ) of a water turbine is defined as the speed of a geometrically similar turbine that would develop one unit of power (1 kW or 1 HP) when operating under a unit head (1 meter). It serves as a dimensionless performance parameter used to classify turbines and predict their operational efficiency under different site conditions.
The specific speed (NsтАЛ) of a water turbine is defined as the speed of a geometrically similar turbine that would develop one unit of power (1 kW or 1 HP) when operating under a unit head (1 meter). It serves as a dimensionless performance parameter used to classify turbines and predict their operational efficiency under different site conditions.
NsтАЛ=H5/4NPтАЛтАЛ тАФ where N is speed in rpm, P is power in kW/HP, and H is head in meters.
The principle relies on the concept of geometric similarity and homologous performance laws. By mathematically collapsing the variables of speed (N), power (P), and head (H) using the relation NsтАЛ=H5/4NPтАЛтАЛ, engineers can compare turbines of varying sizes and designs. This allows for the selection of the most suitable turbine typeтАФPelton, Francis, or KaplanтАФbased on the site-specific head and flow characteristics.
Specific speed is independent of the actual size of the turbine for geometrically similar designs.
It helps in the selection of the type of turbine for a given head and discharge.
Low NsтАЛ indicates Pelton wheel (high head), while high NsтАЛ indicates Kaplan turbine (low head).
Allows comparison between different turbine designs.
Facilitates site-specific selection of hydraulic machinery.
Values vary depending on whether HP or kW units are used.
Cannot be applied to non-geometrically similar runners.
Hydroelectric power plant design.
Performance analysis and classification of hydraulic turbines.
Pelton turbines typically have a low specific speed (10тАУ35), Francis turbines range from 60тАУ300, and Kaplan/Propeller turbines have high specific speeds (300тАУ1000+).
Option B is incorrect because 'unit horse power' is defined at 'unit head', but the speed must also be defined relative to unit conditions to be specific speed.
C is correct тАФ Specific speed is defined as the speed of a geometrically similar runner that develops unit power under unit head.
Always remember that for a given head, a high specific speed corresponds to a turbine requiring higher flow rate, such as a Kaplan turbine, which is ideal for low-head, high-flow applications.