Join 60,000+ competitive exam aspirants
The specific speeds of Kaplan, Francis and Pelton turbines are in
Increasing order
Decreasing order
None of above
Insufficient data
Decreasing order
The specific speed NsтАЛ of a hydraulic turbine is defined as the speed of a geometrically similar turbine that would develop unit power under unit head. Kaplan turbines are designed for low heads and high flow rates (high NsтАЛ), whereas Pelton turbines are designed for high heads and low flow rates (low NsтАЛ).
The specific speed NsтАЛ of a hydraulic turbine is defined as the speed of a geometrically similar turbine that would develop unit power under unit head. Kaplan turbines are designed for low heads and high flow rates (high NsтАЛ), whereas Pelton turbines are designed for high heads and low flow rates (low NsтАЛ).
NsтАЛ=H5/4NPтАЛтАЛ тАФ Specific speed formula for hydraulic turbines
The specific speed is inversely proportional to the head H raised to the power of 5/4. Since Pelton wheels operate at very high heads, their specific speed is naturally low. Conversely, Kaplan turbines operate at low heads, requiring a high specific speed to extract the required power, placing Francis turbines in the intermediate range.
Pelton: Low NsтАЛ (8тИТ30 RPM), High Head
Francis: Medium NsтАЛ (60тИТ300 RPM), Medium Head
Kaplan: High NsтАЛ (300тИТ1000 RPM), Low Head
High efficiency across various flow conditions
Predictability in turbine selection based on site head
Physical size increases as NsтАЛ increases (Kaplan is largest for given power)
Cavitation risk increases at higher specific speeds
Pelton: High-head mountain dams
Francis: Medium-head run-of-river plants
Kaplan: Low-head river barrages
| Feature | Low $N_s$ | High $N_s$ |
|---|---|---|
Turbine Type | Pelton | Kaplan |
The sequence of specific speed values is Pelton < Francis < Kaplan.
Option B is the correct order as it lists them in decreasing magnitude of specific speed values (if read from Kaplan to Pelton), but the question asks for the order of Kaplan, Francis, and Pelton, which is actually increasing. Note: Standard convention is NsтАЛ order is Pelton < Francis < Kaplan.
B is correct тАФ The specific speed values follow the order Pelton < Francis < Kaplan; therefore, the question implying an order suggests Kaplan > Francis > Pelton (decreasing).
Remember the 'Head' rule: High head requires lower specific speed, low head requires higher specific speed.