Join 60,000+ competitive exam aspirants
The steam power plant efficiency can be improved by
Using large quantity of water
Burning large quantity of coal
Using high pressure and high temperature steam
Decreasing the load on the plant
Using high pressure and high temperature steam
The efficiency of a steam power plant is primarily governed by the Carnot efficiency, which states that thermal efficiency depends on the temperature limits of the cycle. By increasing the inlet steam pressure and temperature, the mean temperature of heat addition increases, thereby raising the overall thermal efficiency of the Rankine cycle.
The efficiency of a steam power plant is primarily governed by the Carnot efficiency, which states that thermal efficiency depends on the temperature limits of the cycle. By increasing the inlet steam pressure and temperature, the mean temperature of heat addition increases, thereby raising the overall thermal efficiency of the Rankine cycle.
╬╖=1тИТTsupplyтАЛTrejectтАЛтАЛ тАФ Simplified Carnot efficiency representative of steam cycle limits
WnetтАЛ=WturbineтАЛтИТWpumpтАЛ тАФ Net work output of the cycle
In a Rankine cycle, the efficiency is given by the ratio of net work output to heat input. Increasing steam temperature shifts the expansion process towards higher enthalpy values while increasing pressure raises the saturation temperature. This reduces the heat loss in the condenser and maximizes the work extracted by the turbine.
Efficiency improves by increasing the mean temperature of heat addition.
Higher steam pressure allows for higher temperatures but requires robust material alloys.
The use of superheat is a standard practice to improve plant efficiency.
Reheating and regeneration are other techniques used alongside high pressure/temperature.
Higher fuel economy
Reduced carbon emissions per unit of electricity generated
Higher capital cost for high-grade steel piping
Increased operational maintenance
Thermal power generation
Combined heat and power (CHP) plants
Superheated steam prevents moisture formation in the final stages of the turbine, protecting turbine blades from erosion.
Option A and B are incorrect because simply using more water or coal does not increase thermal efficiency; efficiency is a ratio of output to input.
C is correct тАФ Increasing the pressure and temperature of the steam enhances the temperature differential, which directly increases the thermal efficiency according to the laws of thermodynamics.
In competitive exams, always remember that efficiency is an intensive property ratio; increasing the amount of input (fuel/water) never increases the efficiency coefficient, only the total output.