Join 60,000+ competitive exam aspirants
The term self GMD is used to calculate
Capacitance
Inductance
Both inductance and capacitance
Resistance
Inductance
Self-Geometric Mean Distance (Self-GMD) or Geometric Mean Radius (GMR) is a parameter used exclusively in the calculation of the internal inductance of a transmission line conductor. It accounts for the internal magnetic flux linkages of the conductor, treating a stranded conductor as an equivalent solid conductor with a specific effective radius.
Self-Geometric Mean Distance (Self-GMD) or Geometric Mean Radius (GMR) is a parameter used exclusively in the calculation of the internal inductance of a transmission line conductor. It accounts for the internal magnetic flux linkages of the conductor, treating a stranded conductor as an equivalent solid conductor with a specific effective radius.
L=2├Ч10тИТ7ln(GMRGMDтАЛ)┬аH/m тАФ Formula for Inductance per unit length
GMR=reтИТ1/4=0.7788r тАФ Geometric Mean Radius for a solid circular conductor
The total inductance of a conductor is the sum of internal and external flux linkages. While external inductance depends on the geometric mean distance (GMD) between conductors, internal inductance depends on the conductor's geometric configuration. Self-GMD (denoted as DsтАЛ or rтА▓) modifies the radius to rтА▓=reтИТ1/4 to simplify the calculation of internal flux as if it were a thin shell.
Self-GMD is often referred to as Geometric Mean Radius (GMR).
It depends only on the physical layout and cross-sectional geometry of the conductor.
It does not affect capacitance calculations, where the actual physical radius r is used.
For stranded conductors, it is calculated based on the number and arrangement of strands.
Simplifies complex inductance calculations for stranded conductors.
Provides a unified parameter for both solid and bundled conductors.
Not applicable to capacitance calculations (can lead to errors if misused).
Dependent on the specific stranding pattern of the cable.
Overhead transmission line design.
Calculating voltage drop and efficiency of power systems.
Power system stability analysis.
The constant 0.7788 comes from eтИТ0.25, which accounts for the internal flux linkage.
Option C is incorrect because capacitance depends on the actual geometric radius, not the internal flux-corrected GMR.
B is correct тАФ The term self GMD (or GMR) is used specifically to account for internal flux linkage when calculating the inductance of a conductor.
Always remember: use physical radius r for Capacitance (C=ln(D/r)2╧А╧╡тАЛ) and GMR (0.7788r) for Inductance calculations.