Join 60,000+ competitive exam aspirants
To increase the transmission capability of a high voltage long line
Resistance can be increased
Resistance can be decreased
Series reactors can be reduced
Shunt admittance can be reduced
Series reactors can be reduced
The power transmission capability of a long transmission line is primarily limited by its series inductive reactance. Since power transfer is inversely proportional to the line reactance (P=XV1тАЛV2тАЛтАЛsin╬┤), reducing the net series reactance increases the steady-state power transfer capability.
The power transmission capability of a long transmission line is primarily limited by its series inductive reactance. Since power transfer is inversely proportional to the line reactance (P=XV1тАЛV2тАЛтАЛsin╬┤), reducing the net series reactance increases the steady-state power transfer capability.
P=XтИгVSтАЛтИгтИгVRтАЛтИгтАЛsin╬┤ тАФ Power transfer equation for a lossless line where X is the total series reactance
XLтАЛ=2╧АfL тАФ Inductive reactance formula
In high-voltage long lines, the inductive reactance (XLтАЛ=2╧АfL) creates a significant voltage drop and phase shift. By reducing the effective series reactance (often using series capacitors or reducing series reactor compensation), the power transmission capacity is improved. This is equivalent to decreasing the electrical distance between the sending and receiving ends.
Long lines are essentially limited by surge impedance loading (SIL) and steady-state stability limits.
Reducing series inductive reactance directly increases the power transfer capability (PmaxтАЛ=XV1тАЛV2тАЛтАЛ).
Series compensation is a common method to reduce the effective series reactance of a line.
Increasing resistance decreases transmission capability due to higher I2R losses and thermal constraints.
Higher steady-state stability limit
Improved voltage profile along the line
Potential risk of sub-synchronous resonance (SSR)
Increased complexity in protection schemes
Extra High Voltage (EHV) long-distance transmission lines
Interconnection of regional power grids
Resistance is generally kept as low as possible using high-conductivity materials like ACSR to minimize power loss, not to increase capability.
Shunt admittance reduction (by changing line configuration) is not the standard approach for capacity enhancement compared to series reactance modification.
C is correct тАФ Reducing series reactance (series reactors) decreases the line impedance, which directly increases the maximum steady-state power that can be transmitted across a long transmission line.
Always remember that in power systems, 'stability' and 'capability' are dominated by reactance (X), whereas 'loss' and 'efficiency' are dominated by resistance (R).