Join 60,000+ competitive exam aspirants
Topping turbines are
Low pressure condensing one
High pressure condensing one
High pressure non-condensing one
Low pressure non-condensing one
High pressure non-condensing one
Topping turbines are high-pressure, non-condensing steam turbines used in combined-cycle or industrial cogeneration plants. They exhaust their steam at a relatively high pressure, which is then utilized by a downstream lower-pressure turbine or for process heating applications.
Topping turbines are high-pressure, non-condensing steam turbines used in combined-cycle or industrial cogeneration plants. They exhaust their steam at a relatively high pressure, which is then utilized by a downstream lower-pressure turbine or for process heating applications.
╬╖overallтАЛ=QfuelтАЛWturbineтАЛ+QprocessтАЛтАЛ тАФ represents the thermal efficiency of a cogeneration (topping) cycle.
In a topping turbine configuration, high-pressure steam from a boiler expands through the turbine to a pressure level suitable for secondary processes. Because the turbine is non-condensing, it does not exhaust to a vacuum condenser, preserving the thermal energy of the exhaust steam for subsequent utility, thereby maximizing the total thermal efficiency of the plant cycle.
Operates at high inlet pressure and discharges at pressures greater than atmospheric.
Eliminates the need for a low-pressure condenser at the topping stage.
Increases the overall thermal efficiency of steam power systems through cogeneration.
Commonly used in industries like sugar mills, paper mills, and refineries for process steam supply.
Significant improvement in overall thermal efficiency.
Reduces fuel consumption by dual use of steam energy.
Lower cooling water requirements compared to pure condensing cycles.
Complex plant integration requirements.
Output is directly linked to the demand for process steam (heat-load dependency).
Requires robust boiler systems capable of handling high pressures.
Combined Heat and Power (CHP) plants.
Industrial cogeneration units.
District heating systems.
Option A/D (Low pressure) are incorrect as topping units require high energy input (enthalpy) to provide work while leaving energy for downstream processes.
Option B is incorrect because condensing turbines aim to extract maximum work by expanding to a vacuum, which would defeat the 'topping' purpose of supplying exhaust steam for secondary heating.
C is correct тАФ Topping turbines are high-pressure, non-condensing units designed to exhaust steam at a high enough pressure for further industrial use.
Always remember that 'topping' refers to the primary use of high-grade energy, while 'bottoming' refers to using lower-grade thermal energy from a high-temperature process.