Join 60,000+ competitive exam aspirants
Steam turbines are governed by
Nozzle control governing
Throttle governing
Bypass governing
All of above
All of above
Steam turbine governing refers to the process of regulating the mass flow rate of steam to maintain a constant speed or power output despite varying load conditions. All three listed methodsтАФNozzle, Throttle, and BypassтАФare standard industrial techniques used to control steam turbine performance.
Steam turbine governing refers to the process of regulating the mass flow rate of steam to maintain a constant speed or power output despite varying load conditions. All three listed methodsтАФNozzle, Throttle, and BypassтАФare standard industrial techniques used to control steam turbine performance.
P=m╦Щ├Ч╬Фh тАФ Power output related to mass flow rate and enthalpy drop
N2тАЛN1тАЛтАЛ=P2тАЛP1тАЛтАЛтАЛ тАФ Approximation for turbine speed regulation
Governing controls the turbine speed by adjusting steam input. Throttle governing reduces steam pressure at the inlet, Nozzle governing shuts off groups of nozzles to reduce mass flow while maintaining pressure, and Bypass governing allows steam to enter lower-pressure stages directly during overload conditions.
Governing maintains constant frequency in generators by controlling input energy.
Throttle governing is simple but leads to higher throttling losses at low loads.
Nozzle governing is more efficient at part loads compared to throttle governing.
Bypass governing is specifically used to handle sudden overload requirements.
Maintains constant rotational speed under varying load
Ensures operational stability of the electrical grid
Prevents turbine runaway during load shedding
Throttling causes significant drop in enthalpy and efficiency
Complexity increases with additional control valves
Mechanical wear on governor valve seats over time
Thermal power plants
Industrial process steam turbines
Marine propulsion systems
| Feature | Throttle Governing | Nozzle Governing |
|---|---|---|
Efficiency at Part Load | Low | High |
Governing ensures that the generated frequency remains within 50Hz ┬▒ 0.5Hz.
The governor mechanism can be mechanical, hydraulic, or electro-hydraulic.
D is correct тАФ All listed methods (Nozzle, Throttle, and Bypass) are valid techniques employed to control the mass flow and energy input of steam turbines.
Always remember that in steam turbines, the governor essentially acts as the primary frequency controller for the connected synchronous generator in a power system.