Join 60,000+ competitive exam aspirants
Transmission lines are transposed to
Reduce corona loss
Reduce skin effect
Prevent interference with telephone line
Prevent short circuit between any two line
Prevent interference with telephone line
Transposition of transmission lines involves exchanging the positions of conductors at regular intervals along the line length. This practice ensures that the mutual inductance and capacitance between each phase and the ground (or communication circuits) are balanced over the total distance of the transmission line.
Transposition of transmission lines involves exchanging the positions of conductors at regular intervals along the line length. This practice ensures that the mutual inductance and capacitance between each phase and the ground (or communication circuits) are balanced over the total distance of the transmission line.
VabтАЛ=IaтАЛZaaтАЛ+IbтАЛZabтАЛ+IcтАЛZacтАЛ тАФ General voltage drop equation considering mutual coupling
LavgтАЛ=31тАЛ(LaтАЛ+LbтАЛ+LcтАЛ) тАФ Average inductance per phase after one complete transposition cycle
In an untransposed line, the asymmetrical physical arrangement leads to unequal phase inductances and capacitances, resulting in an unbalanced current and induced EMF in nearby communication circuits. By rotating the conductor positions through transposition cycles, the average impedance of each phase becomes identical, effectively neutralizing the net inductive interference induced in neighboring telephone lines.
Transposition balances line parameters (R, L, C) across all three phases.
It is primarily used in long-distance overhead lines where induction effects are significant.
It mitigates the flow of zero-sequence currents due to imbalance.
Essential for complying with Electromagnetic Compatibility (EMC) standards for telecommunication systems.
Reduces electromagnetic interference (EMI) with neighboring communication lines.
Balances the line inductance and capacitance, leading to equal voltage drops in all phases.
Increases the cost and complexity of the tower structures.
Requires additional hardware like transposition towers and jumper connections.
High-voltage long-distance transmission systems.
Lines running parallel to communication or railway signalling circuits.
Corona loss is mitigated by increasing conductor diameter or using bundled conductors, not transposition.
Skin effect is managed by conductor material and geometry (e.g., ACSR conductors), not transposition.
Transposition prevents short circuits only if the clearance is maintained, which is a structural design aspect.
C is correct тАФ Transmission lines are transposed to ensure balanced line parameters and prevent electromagnetic interference with parallel communication circuits.
Always remember that transposition addresses imbalance/interference (asymmetry), whereas corona and skin effect are related to conductor geometry and frequency.